Tandem gas metal arc welding (T-GMAW) utilizes simultaneous deposition from two wires to enhance the productivity for joining thick sections. Current knowledge on the actual energy consumption vis-à-vis filler wire deposition rate in T-GMAW is limited. We present here a detailed investigation on multi-pass single V-groove T-GMAW of a 30 mm thick structural steel plate with real-time monitoring of current, voltage and metal transfer modes for both filler wires. A novel electrical deposition efficiency (EDE) metric is realized using measured current and voltage transients to correlate electrical energy usage with the deposition rate. For a constant wire feed rate, the short-circuiting metal transfer mode resulted in much lesser energy input and 50% higher EDE in comparison to the pulsed mode of metal transfer. © The Author(s) 2026. This article is distributed under the terms of the Creative Commons Attribution 4.0 License (https://creativecommons.org/licenses/by/4.0/) which permits any use, reproduction and distribution of the work without further permission provided the original work is attributed as specified on the SAGE and Open Access page (https://us-sagepub-com.ezproxy.server.hv.se/en-us/nam/open-access-at-sage).
CC BY 4.0