In order to detect the geo-hazards, different deformation monitoring networks are usually established. It is of importance to design an optimal monitoring network to fulfil the requested precision and reliability of the network. Generally, the same observation plan is considered during different time intervals (epochs of observation). Here, we investigate the case that instrumental improvements in sense of precision are used in two successive epochs. As a case study, we perform the optimisation procedure on a GPS monitoring network around the Lilla Edet village in the southwest of Sweden. The network was designed for studying possible displacements caused by landslides. The numerical results show that the optimisation procedure yields an observation plan with significantly fewer baselines in the latter epoch, which leads to saving time and cost in the project. The precision improvement in the second epoch is tested in several steps for the Lilla Edet network. For instance, assuming two times better observation precision in the second epoch decreases the number of baselines from 215 in the first epoch to 143 in the second one.

Estimation of variance in an ordinary adjustment model is straightforward, but if the model becomes unstable or ill-conditioned its solution and the variance of the solution will be very sensitive to the errors of observations. This sensitivity can be controlled by stabilizing methods but the results will be distorted due to stabilization. In this paper, stabilizing an unstable condition model using Tikhonov regularization, the estimations of variance of unit weight and variance components are investigated. It will be theoretically proved that the estimator of variance or variance components has not the minimum variance property when the model is stabilized, but unbiased estimation of variance is possible. A simple numerical example is provided to show the performance of the theory.

The Gravity field and steady-state Ocean Circulation Explorer (GOCE) mission is dedicated to recover spherical harmonic coefficients of the Earth's gravity field to degree and order of about 250 using its satellite gradiometric data. Since these data are contaminated with coloured noise, therefore, their inversion will not be straightforward. Unsuccessful modelling of this noise will lead to biases in the harmonic coefficients presented in the Earth's gravity models (EGMs). In this study, five of the recent EGMs of GOCE such as two direct, two time-wise and one space-wise solution are used to degree and order 240 and their reliability is investigated with respect to EGM08 which is assumed as a reliable EGM. The detected unreliable coefficients and their errors are replaced by the corresponding ones from EGM08 as a combination strategy. A condition adjustment model is organised for each two corresponding coefficients of GOCE EGMs and EGM08; and errors of the GOCE EGMs are calibrated based on a scaling factor, obtained from a posteriori variance factor. When the factor is less than 2.5 it will be multiplied to the error otherwise the error of EGM08 coefficient will be considered as the calibrated one. At the end, a simple geoid estimator is presented which considers the EGMs and their errors and its outcomes are compared with the corresponding geoid heights derived from the Global Positioning System (GPS) and the levelling data (GPS/levelling data), over Fennoscandia. This comparison shows that some of the combined-calibrated GOCE EGMs are closer to the GPS/levelling data than the original ones.

One of the problems in the single-objective optimisation models (SOOMs) for optimising geodetic networks is the contradiction of the controlling constraints, which may lead to their violation or infeasibility in the optimisation process. One way to solve this problem is to use a bi-objective optimisation model (BOOM) instead of SOOMs. In this paper, we will use the BOOM of precision and reliability and investigate the influence of the controlling constraints in a two-dimensional simulated network. Our studies show that the unconstrained BOOM is a good model, which almost fulfils our precision and reliability demands of the network. This model is also economical as more observables are removed from the plan whilst adding the controlling constraints leads to including more observables, which have no significant role

Högskolan Väst, Institutionen för ingenjörsvetenskap, Avd för elektro, lantmäteri och naturvetenskap. K N Toosi University of Technology, Department of Geodesy, Tehran, Iran.

Bagherbandi, Mohammad

University of Gävle, Department of Industrial Development, IT and Land Management .

The gravimetric model of the Moho discontinuity is usually derived based on isostatic adjustment theories considering floating crust on the viscous mantle. In computation of such a model some a priori information about the density contrast between the crust and mantle and the mean Moho depth are required. Due to our poor knowledge about them they are assumed unrealistically constant. In this paper, our idea is to improve a computed gravimetric Moho model, by the Vening Meinesz-Moritz theory, using the seismic model in Fennoscandia and estimate the error of each model through a combined adjustment with variance component estimation process. Corrective surfaces of bi-linear, bi-quadratic, bi-cubic and multi-quadric radial based function are used to model the discrepancies between the models and estimating the errors of the models. Numerical studies show that in the case of using the bi-linear surface negative variance components were come out, the bi-quadratic can model the difference better and delivers errors of 2.7 km and 1.5 km for the gravimetric and seismic models, respectively. These errors are 2.1 km and 1.6 km in the case of using the bi-cubic surface and 1 km and 1.5 km when the multi-quadric radial base function is used. The combined gravimetric models will be computed based on the estimated errors and each corrective surface.

Högskolan Väst, Institutionen för ingenjörsvetenskap, Avdelningen för data-, elektro- och lantmäteriteknik. Division of Geodesy, Royal Institute of Technology, Stockholm, Sweden.

Lars E., Sjöberg

Division of Geodesy, Royal Institute of Technology, Stockholm, Sweden.

Ramin, Kiamehr

Department of Geodesy and Geomatics, Zanjan University, Zanjan, Iran.

The problem of handling outliers in a deformation monitoring network is of special importance, because the existence of outliers may lead to false deformation parameters. One of the approaches to detect the outliers is to use robust estimators. In this case the network points are computed by such a robust method, implying that the adjustment result is resisting systematic observation errors, and, in particular, it is insensitive to gross errors and even blunders. Since there are different approaches to robust estimation, the resulting estimated networks may differ. In this article, different robust estimation methods, such as the M-estimation of Huber, the “Danish”, and the L 1-norm estimation methods, are reviewed and compared with the standard least squares method to view their potentials to detect outliers in the Tehran Milad tower deformation network. The numerical studies show that the L 1-norm is able to detect and down-weight the outliers best, so it is selected as the favourable approach, but there is a lack of uniqueness. For comparison, Baarda’s method “data snooping” can achieve similar results when the outlier magnitude of an outlier is large enough to be detected; but robust methods are faster than the sequential data snooping process.

There are different criteria for designing a geodetic network in an optimal way.An optimum network can be regarded as a network having high precision, reliabilityand low cost. Accordingly, corresponding to these criteria different single-objectivemodels can be defined. Each one can be subjected to two other criteria as constraints.Sometimes the constraints can be contradictory so that some of the constraints areviolated. In this contribution, these models are mathematically reviewed. It is numericallyshown how to prepare these mathematical models for optimization processthrough a simulated network. We found that the reliability model yields small positionchanges between those obtained using precision respectively. Elimination ofsome observations may happen using precision and cost model while the reliabilitymodel tries to save number of observations. In our numerical studies, no contradictionscan be seen in reliability model and this model

In precise geoid modelling the combination of terrestrial gravity data and an Earth Gravitational Model (EGM) is standard. The proper combination of these data sets is of great importance, and spectral combination is one alternative utilized here. In this method data from satellite gravity gradiometry (SGG), terrestrial gravity and an EGM are combined in a least squares sense by minimizing the expected global mean square error. The spectral filtering process also allows the SGG data to be downward continued to the Earth's surface without solving a system of equations, which is likely to be ill-conditioned. Each practical formula is presented as a combination of one or two integral formulas and the harmonic series of the EGM.Numerical studies show that the kernels of the integral part of the geoid and gravity anomaly estimators approach zero at a spherical distance of about 5°. Also shown (by the expected root mean square errors) is the necessity to combine EGM08 with local data, such as terrestrial gravimetric data, and/or SGG data to attain the 1-cm accuracy in local geoid determination.