Change search
Refine search result
1234 1 - 50 of 152
CiteExportLink to result list
Permanent link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Rows per page
  • 5
  • 10
  • 20
  • 50
  • 100
  • 250
Sort
  • Standard (Relevance)
  • Author A-Ö
  • Author Ö-A
  • Title A-Ö
  • Title Ö-A
  • Publication type A-Ö
  • Publication type Ö-A
  • Issued (Oldest first)
  • Issued (Newest first)
  • Created (Oldest first)
  • Created (Newest first)
  • Last updated (Oldest first)
  • Last updated (Newest first)
  • Disputation date (earliest first)
  • Disputation date (latest first)
  • Standard (Relevance)
  • Author A-Ö
  • Author Ö-A
  • Title A-Ö
  • Title Ö-A
  • Publication type A-Ö
  • Publication type Ö-A
  • Issued (Oldest first)
  • Issued (Newest first)
  • Created (Oldest first)
  • Created (Newest first)
  • Last updated (Oldest first)
  • Last updated (Newest first)
  • Disputation date (earliest first)
  • Disputation date (latest first)
Select
The maximal number of hits you can export is 250. When you want to export more records please use the 'Create feeds' function.
  • 1.
    Abebe Mengistu, Bemnet
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Internal sensor measurement to reduce the need of coordinate measuring machines2017Independent thesis Advanced level (degree of Master (One Year)), 10 credits / 15 HE creditsStudent thesis
    Abstract [en]

    This thesis presents the approach of determining the machining  errors on a five axis CNC machine using sensors already fitted in the machine to extract valuable data up on process called CITE(CNC Integrity Tracing Equipment) system and measuring the machined workpiece geometry using CMM(Coordinate measurement machine). CITE measurement system is the data acquisition hardware and software system developed by University West for collecting position information from encoders of a machine tool. The collected information could then be used to assess the quality and adjustment of a machine tool, CNC programs and the CNC control parameters. The aim of this study is to examine the roundness and concentricity detection capacity of the CITE system by conducting different milling methods and a turning process. In an example cutting of a workpiece, the CITE measurement system was used for recording the machining process. After that, radial error, centre point deviation and circle roundness errors, analysed using MATLAB based on collected CNC tool movement data. CMM measurement used to verify the results obtained from the CITE measurement system. The investigation conducted on the small circles shows that the CITE measurement system have capability of identifying radial errors in different method of millings (slot, up and down). Centre point deviation and roundness errors measured by the CITE system doesn`t show significant differences between milling methods as seen on CMM measurement.

  • 2.
    Abou Nada, Fahed
    et al.
    Lund University, Department of Physics, Division of Combustion Physics, Box 118, Lund, Swede.
    Lantz, Andreas
    Siemens Industrial Turbomachinery AB, Finspång, Sweden.
    Larfeldt, Jenny
    Siemens Industrial Turbomachinery AB, Finspång, Sweden.
    Markocsan, Nicolaie
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Alden, Marcus
    Lund University, Department of Physics, Division of Combustion Physics, Box 118, Lund, Swede.
    Richter, Mattias
    Lund University, Department of Physics, Division of Combustion Physics, Box 118, Lund, Swede.
    Remote temperature sensing on and beneath atmospheric plasma sprayed thermal barrier coatings using thermographic phosphors2016In: Surface & Coatings Technology, ISSN 0257-8972, E-ISSN 1879-3347, Vol. 302, p. 359-367Article in journal (Refereed)
    Abstract [en]

    Investigations on remote temperature sensing of yttria stabilized zirconia (YSZ) thermal barrier coatings (TBCs) at the surface and at the bond-coat/top-coat interface were carried out. Using Y2O3:Eu thermographic phosphor as an embedded temperature sensing layer, sub-surface temperature probing through 300 mu m of atmospheric plasma sprayed YSZ is demonstrated. The Y2O3:Eu thermographic phosphor displays a temperature sensitivity ranging between 400 degrees C up to a maximum of 900 degrees C when utilizing the luminescence originating from the 611 nm emission band. Dysprosium stabilized zirconia (10 wt.% DySZ), a TBC material, is also investigated and established as a temperature sensor from 400 degrees C up to a temperature of 1000 degrees C using both the intensity decay time and emission intensity ratio methods. In addition, the luminescence of presumed optically inactive YSZ materials was spectroscopically investigated in terms of optical interferences caused by impurities. A validation temperature probing measurement through 300 mu m of YSZ top-coat was successfully performed in a SGT-800 Siemens burner running at six different operating conditions in an atmospheric combustion rig. (C) 2016 Elsevier B.V. All rights reserved.

  • 3.
    Adli, E.
    et al.
    University of Oslo, Oslo, Norway.
    Gjersdal, H.
    University of Oslo, Oslo, Norway.
    Røhne, O.M.
    University of Oslo, Oslo, Norway.
    Dorholt, O.
    University of Oslo, Oslo, Norway.
    Bang, D.M.
    University of Oslo, Oslo, Norway.
    Thomas, D,
    ESS ERIC, Lund, Sweden.
    Shea, T.
    ESS ERIC, Lund, Sweden.
    Andersson, R.
    ESS ERIC, Lund, Sweden.
    Ibison, M.G.
    University of Liverpool and Cockcroft Institute, Daresbury, UK.
    Welsch, C.P
    University of Liverpool and Cockcroft Institute, Daresbury, UK.
    Joshi, Shrikant V.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing. University West, Department of Engineering Science, Research Enviroment Production Technology West.
    THE ESS TARGET PROTON BEAM IMAGING SYSTEMAS IN-KIND CONTRIBUTION2017In: Proceedings of IPAC2017, Copenhagen, Denmark, 2017, p. 3422-3425Conference paper (Refereed)
  • 4.
    Agic, Adnan
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Eynian, Mahdi
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Hägglund, .
    Seco Tools, Fagersta, Sweden.
    Ståhl, J-E
    Lund University ,Production and Materials Engineering, Lund Sweden.
    Beno, Tomas
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Influence of radial depth of cut on entry conditions and dynamics in face milling application2017In: Journal of Superhard Materials, ISSN 1063-4576, Vol. 39, no 4, p. 259-270Article in journal (Refereed)
    Abstract [en]

    The choice of milling cutter geometry and appropriate cutting data for certain milling application is of vital importance for successful machining results. Unfavorable selection of cutting conditions might give rise to high load impacts that cause severe cutting edge damage. Under some circumstances the radial depth of cut in combination with milling cutter geometry might give unfavorable entry conditions in terms of cutting forces and vibration amplitudes. This phenomenon is originated from the geometrical features that affect the rise time of the cutting edge engagement into workpiece at different radial depths of cut. As the radial depth of cut is often an important parameter, particularly when machining difficult-to-cut materials, it is important to explore the driving mechanism behind vibrations generation. In this study, acceleration of the workpiece is measured for different radial depths of cut and cutting edge geometries. The influence of the radial depth of cut on the dynamical behavior is evaluated in time and frequency domains. The results for different radial depths of cut and cutting geometries are quantified using the root mean square value of acceleration. The outcome of this research study can be used both for the better cutting data recommendations and improved tool design.

  • 5.
    Agic, Adnan
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing. Seco Tools, Fagersta, Sweden.
    Eynian, Mahdi
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Hägglund, S.
    Seco Tools, Fagersta, Sweden.
    Ståhl, Jan-Eric
    Lund University, Production and Materials Engineering, Lund, Sweden.
    Beno, Tomas
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Influence of radial depth of cut on dynamics of face milling application2016In: The 7th International Swedish Production Symposium, SPS16, Conference Proceedings: 25th – 27th of October 2016, Lund: Swedish Production Academy , 2016, p. 1-9Conference paper (Refereed)
    Abstract [en]

    The choice of milling cutter geometry and appropriate cutting data for certain milling application is of vital importance for successful machining results. Unfavourable selection of cutting conditions might give rise to high load impacts that cause severe cutting edge damage. The radial depth of cut in combination with milling cutter geometry might under some circumstances give unfavourable entry conditions in terms of cutting forces and vibration amplitudes. This phenomenon originates from the geometrical features that affect the rise time of the cutting edge engagement into work piece at different radial depths of cut. As the radial depth of cut is often an important parameter, particularly when machining difficult to cut materials, it is important to explore the driving mechanism behind vibrations generation. In this study, acceleration of the work piece is measured for different radial depths of cut and cutting edge geometries. The influence of the radial depth of cut on the dynamical behaviour is evaluated in time and frequency domains. The results for different radial depths of cut and cutting geometries are quantified using root mean square value of acceleration. The outcome of this research study can be used both for the better cutting data recommendations and improved tool design.

  • 6.
    Agic, Adnan
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing. Seco Tools AB,Fagersta, Sweden.
    Gutnichenko, O.
    Division of Production and Materials Engineering, Lund University, Sweden.
    Eynian, Mahdi
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Ståhl, J-E
    Division of Production and Materials Engineering, Lund University, Sweden.
    Influence of cutting edge geometry on force build-up process in intermittent turning2016In: Procedia CIRP, ISSN 2212-8271, E-ISSN 2212-8271, Vol. 46, p. 364-367Article in journal (Refereed)
    Abstract [en]

    In the intermittent turning and milling processes, during the entry phase the cutting edges are subjected to high impact loads that can give rise to dynamical and strength issues which in general cause tool life reduction. In this study the effect of geometrical features of the cutting tool on the force generation during the entry phase is investigated. Cutting forces are measured by a stiff dynamometer at a high sampling frequency. In addition, the chip load area is analyzed and related to the measured cutting force. The results show that micro-geometrical features, in particular the protection chamfer, significantly affect the force generation during the entry phase.

  • 7.
    Augustsson, Svante
    et al.
    University West, Department of Engineering Science, Division of Automation Systems.
    Olsson, Jonas
    University West, Department of Engineering Science, Division of Manufacturing Processes. University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Gustavsson Christiernin, Linn
    University West, Department of Engineering Science, Division of Manufacturing Processes.
    Bolmsjö, Gunnar
    University West, Department of Engineering Science, Division of Automation and Computer Engineering.
    How to Transfer Information Between Collaborating Human Operators and Industrial Robots in an Assembly2014In: Proceedings the NordiCHI 2014: The 8th Nordic Conference on Human-Computer Interaction: Fun, Fast, Foundational, 2014, p. 286-294Conference paper (Refereed)
    Abstract [en]

    Flexible human-robot industrial coproduction will be important in many small and middle-sized companies in the future. One of the major challenges in a flexible robot cell is how to transfer information between the human and the robot with help of existing and safety approved equipment. In this paper a case study will be presented where the first half focus on data transfer to the robot communicating the human's position and movements forcing the robot to respond to the triggers. The second half focuses on how to visualize information about the settings and assembly order to the human. The outcome was successful and flexible, efficient coproduction could be achieved but also a number of new challenges were found.

  • 8.
    Awasthi, Shikha
    et al.
    Material Science and Engineering, Indian Institute of Technology, Kanpur, Kanpur, India .
    Goel, Sneha
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Pandey, Chandra Prabha
    Babu Banarasi Das University, Department of Chemistry, Lucknow, India.
    Balani, Kantesh
    Material Science and Engineering, Indian Institute of Technology, Kanpur, Kanpur, India .
    Multi-Length Scale Tribology of Electrophoretically Deposited Nickel-Diamond Coatings2017In: JOM: The Member Journal of TMS, ISSN 1047-4838, E-ISSN 1543-1851, Vol. 69, no 2, p. 227-235Article in journal (Refereed)
    Abstract [en]

    Electrophoretically deposited (EPD) nickel and its composite coatings are widely used to enhance the life span of continuous ingot casting molds in the steel, aerospace and automotive industries. This article reports the effect of different concentrations of diamond particles (2.5–10 g/L) on the wear mechanism of EPD Ni. The distribution of diamond particles in the Ni matrix was observed using Voronoi tessellation. Variation in COF was observed by a fretting wear test to be 0.51 ± 0.07 for Ni, which decreases to 0.35 ± 0.03 for the Ni-diamond coatings. The wear volume of the coatings with 7.5 g/L concentration of diamond was observed to be a minimum (0.051 ± 0.02 × 10−3 mm3) compared with other composite coatings. Further, the micro-scratch testing of the coatings also exhibited a reduced COF (0.03–0.12) for 7.5 g/L diamond concentration compared with Ni (0.08–0.13). Higher wear resistance of the diamond-added coatings (optimum 7.5 g/L concentration) is due to the balance between the dispersion strengthening mechanism and the enhancement of the load-bearing capacity due to the incorporation of diamond particles. Thus, these composites can be used for applications in automotive and aerospace industries. © 2016 The Minerals, Metals & Materials Society

  • 9.
    Bhardwaj, Sanjay
    et al.
    International Advanced Research Centre for Powder Metallurgy and New Materials (ARCI), Hyderabad, India.
    Padmanabham, G.
    International Advanced Research Centre for Powder Metallurgy and New Materials (ARCI), Hyderabad, India.
    Jain, Karuna
    National Institute of Industrial Engineering (NITIE), Mumbai, India.
    Srinivasa Rao, D.
    International Advanced Research Centre for Powder Metallurgy and New Materials (ARCI), Hyderabad, India.
    Joshi, Shrikant V.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing. University West, Department of Engineering Science, Research Enviroment Production Technology West.
    Technology commercialization in advanced materials sector: Indian context2017In: Journal of Intellectual Property Rights, ISSN 0971-7544, E-ISSN 0975-1076, Vol. 22, no 3, p. 154-167Article in journal (Refereed)
    Abstract [en]

    This study is aimed at developing insights into the Technology Value Chain (TVC) of advanced materials-based technologies using a scenario in which technology has been transferred by a Research and Technology Organization (RTO) to a Small and Medium Enterprise (SME) in the Indian context. A Conceptual Theoretical Model (CTM) using constructs from existing TVC models is used as a basis for the case study described in this paper. This model is refined using actual evidence from an Indian RTO - the International Advanced Research Centre for Powder Metallurgy and New Materials (ARCI), Hyderabad. The TVC of ARCI’s proprietary Detonation Spray Coating (DSC) technology is used to expand upon the CTM as well as to provide new insights wherever possible. The TVC adopted for DSC includes technology incubation and proof of concept in advance of transferring the technology. These strategies, aided by government funding of the technology recipient companies, were observed to play an important role in successful commercialization. © 2017, National Institute of Science Communication and Information Resources (NISCAIR). All rights reserved.

  • 10.
    Björklund, Stefan
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Förbättrad lönsamhet för biogasanläggningar genom beläggning av knivar2016Conference paper (Other academic)
  • 11.
    Björklund, Stefan
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Goel, Sneha
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Joshi, Shrikant V.
    University West, Department of Engineering Science, Research Enviroment Production Technology West.
    Function-dependent coating architectures by hybrid powder-suspension plasma spraying: Injector design, processing and concept validation2018In: Materials & design, ISSN 0264-1275, E-ISSN 1873-4197, Vol. 142, p. 56-65Article in journal (Refereed)
    Abstract [en]

    The attractive properties achieved by Suspension Plasma Spraying (SPS), combined with the availability of high throughput capable plasma spray systems that permit axial feeding, provide encouragement to explore use of suspensions for next generation functional applications. This paper deals with realization of coatings with various pre-determined function-dependent architectures by employing a hybrid powder-suspension feedstock. Some illustrative application-relevant coating architecture designs are discussed, along with the specific benefits that can accrue by deploying a multi-scale powder-suspension feedstock combination. An elegant feedstock delivery arrangement to enable either simultaneous or sequential feeding of powders and suspensions to enable convenient processing of coatings with desired architectures is presented. As proof-of-concept, deposition of layered, composite and functionally graded coatings using the above system is also demonstrated using appropriate case studies

  • 12.
    Bonilla Hernández, Ana Esther
    et al.
    University West, Department of Engineering Science, Research Enviroment Production Technology West. GKN Aerospace Engine Systems AB, Trollhättan, Sweden.
    Beno, Tomas
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Fredriksson, Claes
    University West, Department of Engineering Science, Division of Industrial Engineering and Management, Electrical- and Mechanical Engineering.
    Energy and Cost Estimation of a Feature-based Machining Operation on HRSA2017In: Procedia CIRP, ISSN 2212-8271, E-ISSN 2212-8271, Vol. 61, no Supplement C, p. 511-516Article in journal (Refereed)
    Abstract [en]

    Forward-looking manufacturing companies aim for sustainable production with low environmental footprint. This is true also for aerospace engine-makers, although their environmental impact mostly occurs during the use-phase of their products. Materials, such as Nickel alloys, are used for special applications where other materials will not withstand tough working conditions in terms of pressure and temperature. Heat Resistant Super Alloys are, however, considered difficult to machine and cutting tools will wear off rapidly. In this paper, a simple way to estimate the energy required, the cost and environmental footprint to produce a work piece using standard engineering software is presented. The results show that for a hypothetical 3 tonne work piece, Inconel 718 will be considerably cheaper and require less water but will require more energy, and has considerably larger CO2 footprint than Waspaloy.

  • 13.
    Das, Kallol
    et al.
    University West, Department of Engineering Science, Trollhättan, Sweden.
    Eynian, Mahdi
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Wretland, Anders
    GKN Aerospace Engine Systems AB, Trollhättan, Sweden.
    Effect of tool wear on quality in drilling of titaniumalloy Ti6Al4V, Part II: Microstructure andMicrohardness2017In: High speed machining, E-ISSN 2299-3975, Vol. 3, p. 11-22Article in journal (Refereed)
    Abstract [en]

    Drilling of Ti6Al4V with worn tools can introduce superficial and easily measured features such as increase of cutting forces, entry and exit burrs and surface quality issues and defects. Such issues were presented in the part I of this paper. In part II, subsurface quality alterations,such as changes of the microstructure and microhardness variation is considered by preparing metallographic sections and measurement, mapping of the depth of grain deformation, and microhardness in these sections. Drastic changes in the microstructure and microhardness were found in sections drilled with drills with large wear lands,particularly in the dry cutting tests. These measurements emphasize the importance of detection of tool wear and ensuring coolant flow in drilling of holes in titanium components.

  • 14.
    Devotta, Ashwin
    et al.
    R&D Turning, Sandvik Coromant, Sandviken.
    Beno, Tomas
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Löf, Ronnie
    R&D Turning, Sandvik Coromant, Sandviken.
    Finite element modelling and characterisation of chip curl in nose turning process2017In: International Journal of Machining and Machinability of Materials, Vol. 19, no 3, p. 277-295Article in journal (Refereed)
    Abstract [en]

    Finite element (FE) modelling of machining provide valuable insights into its deformation mechanics. Evaluating an FE model predicted chip morphology requires characterisation of chip shape, chip curl and chip flow angles. In this study, a chip morphology characterisation methodology is developed using computed tomography (CT), high-speed imaging and Kharkevich model equations enabling evaluation of FE model’s chip morphology prediction accuracy. Chip formation process in nose turning of AISI 1045 steel is simulated using a 3D FE model for varying feed rate and depth of cut and evaluated against experimental investigations using the employed methodology. The study shows that the methodology is able to characterise chip morphology in nose turning process accurately and enables evaluation of FE model’s chip morphology prediction accuracy. This can enable the finite element model to be deployed in cutting tool design for chip breaker geometry design.

  • 15.
    Devotta, Ashwin Moris
    et al.
    University West, Department of Engineering Science, Research Enviroment Production Technology West.
    Beno, Tomas
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Siriki, Ravendra
    Sandvik Materials Technology, Sandviken, Sweden.
    Löf, Ronnie
    Sandvik Coromant AB, Sandviken, Sweden.
    Eynian, Mahdi
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Finite Element Modeling and Validation of Chip Segmentation in Machining of AISI 1045 Steel2017In: Procedia CIRP, ISSN 2212-8271, E-ISSN 2212-8271, Vol. 58, p. 499-504Article in journal (Refereed)
    Abstract [en]

    The finite element (FE) method based modeling of chip formation in machining provides the ability to predict output parameters like cutting forces and chip geometry. One of the important characteristics of chip morphology is chip segmentation. Majority of the literature within chip segmentation show cutting speed (vc) and feed rate (f) as the most influencing input parameters. The role of tool rake angle (α) on chip segmentation is limited and hence, the present study is aimed at understanding it. In addition, stress triaxiality’s importance in damage model employed in FE method in capturing the influence of α on chip morphology transformation is also studied. Furthermore, microstructure characterization of chips was carried out using a scanning electron microscope (SEM) to understand the chip formation process for certain cutting conditions. The results show that the tool α influences chip segmentation phenomena and that the incorporation of a stress triaxiality factor in damage models is required to be able to predict the influence of the α. The variation of chip segmentation frequency with f is predicted qualitatively but the accuracy of prediction needs improvement. © 2017 The Authors.

  • 16.
    Ekberg, Johanna
    et al.
    Chalmers University of Technology, Department of Industrial and Materials Science, Gothenburg, Sweden.
    Ganvir, Ashish
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Klement, Uta
    Chalmers University of Technology, Department of Industrial and Materials Science, Gothenburg, Sweden.
    Creci, Simone
    Chalmers University of Technology, Department of Chemistry and Chemical Engineering, Gothenburg, Sweden.
    Nordstierna, Lars
    Chalmers University of Technology, Department of Chemistry and Chemical Engineering, Gothenburg, Sweden.
    The Influence of Heat Treatments on the Porosity of Suspension Plasma-Sprayed Yttria-Stabilized Zirconia Coatings2018In: Journal of thermal spray technology (Print), ISSN 1059-9630, E-ISSN 1544-1016Article in journal (Refereed)
    Abstract [en]

    Suspension plasma-sprayed coatings are produced using fine-grained feedstock. This allows to control the porosity and to achieve low thermal conductivity which makes the coatings attractive as topcoats in thermal barrier coatings (TBCs). Used in gas turbine applications, TBCs are exposed to high temperature exhaust gases which lead to microstructure alterations. In order to obtain coatings with optimized thermomechanical properties, microstructure alterations like closing of pores and opening of cracks have to be taken into account. Hence, in this study, TBC topcoats consisting of 4 mol.% yttria-stabilized zirconia were heat-treated in air at 1150 °C and thereafter the coating porosity was investigated using image analysis (IA) and nuclear magnetic resonance (NMR) cryoporometry. Both IA and NMR cryoporometry showed that the porosity changed as a result of the heat treatment for all investigated coatings. In fact, both techniques showed that the fine porosity decreased as a result of the heat treatment, while IA also showed an increase in the coarse porosity. When studying the coatings using scanning electron microscopy, it was noticed that finer pores and cracks disappeared and larger pores grew slightly and achieved a more distinct shape as the material seemed to become more compact.

  • 17.
    Ekberg, Johanna
    et al.
    Chalmers University of Technology, Department of Materials and Manufacturing Technology,Göteborg, Sweden.
    Klement, Uta
    Chalmers University of Technology, Department of Materials and Manufacturing Technology,Göteborg, Sweden.
    Björklund, Stefan
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Analysis of single splats produced by axial suspension plasma spraying2017In: Surface Engineering, ISSN 0267-0844, E-ISSN 1743-2944, p. 1-5Article in journal (Refereed)
    Abstract [en]

    Axial suspension plasma spraying (ASPS) is a relatively new, innovative technique with which microstructures have been produced that are similar to the ones produced by electron beam physical vapor deposition. They have a columnar structure and consist of nm- and µm-sized pores. However, so far the formation of the microstructure is not fully understood because fragmentation and vaporisation of the liquid significantly affects the deposition process. Analysis of single splats can provide important information on the phenomena controlling the coating formation process and the final coating properties. Therefore, the present study aims at providing first results of 8 wt-% yttria-stabilised zirconia single splats sprayed onto a steel substrate by use of ASPS. Scanning electron microscopy and atomic force microscopy have been used to characterise the splats with respect to appearance, shape, and size distribution. © 2017 Institute of Materials, Minerals and Mining Published by Taylor & Francis on behalf of the Institute

  • 18.
    Eriksson, Robert
    et al.
    Siemens AG, Large Gas Turbines, Huttenstr. 12, 10553, Berlin, Germany.
    Gupta, Mohit Kumar
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Broitman, Esteban
    Linköping University. IFM, 58183, Linköping, Sweden.
    Jonnalagadda, Krishna Praveen
    Linköping University, IEI, 58183, Linköping, Sweden.
    Nylén, Per
    University West, Department of Engineering Science, Division of Production Engineering.
    Lin Peng, Ru
    Linköping University, IEI, 58183, Linköping, Sweden.
    Stresses and Cracking During Chromia-Spinel-NiO Cluster Formation in TBC Systems2015In: Journal of thermal spray technology (Print), ISSN 1059-9630, E-ISSN 1544-1016, Vol. 24, no 6, p. 1002-1014Article in journal (Refereed)
    Abstract [en]

    Thermal barrier coatings (TBC) are used in gas turbines to reduce the temperatures in the underlying substrate. There are several mechanisms that may cause the TBC to fail; one of them is cracking in the coating interface due to extensive oxidation. In the present study, the role of so called chromia-spinel-NiO (CSN) clusters in TBC failure was studied. Such clusters have previously been found to be prone to cracking. Finite element modeling was performed on a CSN cluster to find out at which stage of its formation it cracks and what the driving mechanisms of cracking are. The geometry of a cluster was obtained from micrographs and modeled as close as possible. Nanoindentation was performed on the cluster to get the correct Young’s moduli. The volumetric expansion associated with the formation of NiO was also included. It was found that the cracking of the CSN clusters is likely to occur during its last stage of formation as the last Ni-rich core oxidizes. Furthermore, it was shown that the volumetric expansion associated with the oxidation only plays a minor role and that the main reason for cracking is the high coefficient of thermal expansion of NiO. © 2015 ASM International

  • 19. Eriksson, Robert
    et al.
    Gupta, Mohit Kumar
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Broitman, Esteban
    Linköping University.
    Jonnalagadda, Krishna Praveen
    Linköping University.
    Nylén, Per
    University West, Department of Engineering Science, Research Environment Production Technology West.
    Peng, Ru Lin
    Linköping University.
    Stress and Cracking during Chromia-Spinel-NiO Cluster Formation in Thermal Barrier Coating Systems2015In: Journal of thermal spray technology (Print), ISSN 1059-9630, E-ISSN 1544-1016, Vol. 24, no 6, p. 1002-1014Article in journal (Refereed)
    Abstract [en]

    Thermal barrier coatings (TBC) are used in gas turbines to reduce the temperatures in the underlying substrate. There are several mechanisms that may cause the TBC to fail; one of them is cracking in the coating interface due to extensive oxidation. In the present study, the role of so called chromia-spinel-NiO (CSN) clusters in TBC failure was studied. Such clusters have previously been found to be prone to cracking. Finite element modeling was performed on a CSN cluster to find out at which stage of its formation it cracks and what the driving mechanisms of cracking are. The geometry of a cluster was obtained from micrographs and modeled as close as possible. Nanoindentation was performed on the cluster to get the correct Young's moduli. The volumetric expansion associated with the formation of NiO was also included. It was found that the cracking of the CSN clusters is likely to occur during its last stage of formation as the last Ni-rich core oxidizes. Furthermore, it was shown that the volumetric expansion associated with the oxidation only plays a minor role and that the main reason for cracking is the high coefficient of thermal expansion of NiO.

  • 20.
    Eynian, Mahdi
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Selection of chatter-free milling conditions using vibration frequency measurements2016In: The 7th International Swedish Production Symposium, SPS16, Conference Proceedings: 25th – 27th of October 2016, Lund: Swedish Production Academy , 2016, p. 1-6Conference paper (Refereed)
    Abstract [en]

    Unwanted vibration of the tool with respect to the workpiece, known as chatter, can damage machine tool, cutting tool, and the surface finish of the workpiece in a machining operation such a milling. These vibrations could be avoided by reducing the depth of cut, but this approach hurts the productivity and reduces material removal rate. Previous studies have established methods, known as stability prediction methods that provide that enable using large depth of cuts while avoiding chatter. The calculation of stability lobes commonly starts by measurement of dynamic properties of the machining structure. This paper investigates an alternative approach, in which vibration frequencies gathered during test cuts with the target machining system are used to identifying the modal parameters of the machining system in its operational condition. An earlier method that was based on a one dimensional dynamics model is modified to use relationships developed for a two dimensional model that describes the dynamics of spindles and tools with axisymmetric dynamics. This approach improves the stability lobe prediction considerably as shown in results.

  • 21.
    Eynian, Mahdi
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Das, Kallol
    University West, Dept. of Engineering Science, Trollhättan, Sweden.
    Wretland, Anders
    GKN Aerospace Engine Systems AB, Trollhättan, Sweden.
    Effect of tool wear on quality in drilling of titaniumalloy Ti6Al4V, Part I: Cutting Forces, BurrFormation, Surface Quality and Defects2017In: High speed machining, E-ISSN 2299-3975, Vol. 3, p. 1-10Article in journal (Refereed)
    Abstract [en]

    Titanium's Ti6Al4V, alloy is an important material with a wide range of applications in the aerospace industry.Due to its high strength, machining this material for desired quality at high material removal rate is challenging and may lead to high tool wear rate. As a result,this material may be machined with worn tools and the effects of tool wear on machining quality need to be investigated.In this experimental paper, it is shown how drills of various wear levels affect the cutting forces, surface quality and burr formation. Furthermore, it is shown that high cutting forces and high plastic deformation, along with high temperatures that arise in cutting with worn tools may lead to initiation of microscopic cracks in the workpiece material in proximity of the drilling zone.

  • 22.
    Eynian, Mahdi
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Wretland, Anders
    GKN Aerospace Engine Systems AB, Trollhättan, Sweden.
    Sensitivity of Axis Tracking Errors of Machine Tools to Tool Wear in Drilling2016In: The 7th International Swedish Production Symposium, SPS16, Conference Proceedings: 25th – 27th of October 2016, Lund: Swedish Production Academy , 2016, p. 1-7Conference paper (Refereed)
    Abstract [en]

    Axis Tracking Errors (ATEs) of the active and inactive axis of numerically controlled machine tools are presented as new means of detection of tool wear that forgo expensive sensors or modifications of the machining structure, however, very little has been published about their capabilities or limitations as signal source for monitoring. In this paper the ATEs and cutting forces in drilling tests in two different machine tools, with drills of varying wear levels are measured. The sensitivity to wear is compared by introducing Percent Deviation from New Tool (PDFNT) factor, which is applied to the peak-to-peak values of the signals. While the ATEs are very small in magnitude, they are highly sensitive to wear levels, with PDFNTs reaching to 1000% for some axis. In addition, the standard deviation of PDFNTs calculated in drilling of seven holes with the same tool represents the repeatability of ATEs. The PDFNTs for ATEs are rather repeatable, but less repeatable than the PDFNTs of the axial drilling force. Furthermore it is shown that ATEs of different machine tools have different levels of sensitivity to wear levels which necessitates calibrating of monitoring systems using ATEs for each machine tool separately.

  • 23.
    Ganvir, Ashish
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Joshi, Shrikant
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Influence of Isothermal Heat Treatment on Porosity and Crystallite Size in Axial Suspension Plasma Sprayed Thermal Barrier Coatings for Gas Turbine Applications2017In: Coatings, ISSN 2079-6412, Vol. 7, no 1, article id 4Article in journal (Refereed)
    Abstract [en]

    xial suspension plasma spraying (ASPS) is an advanced thermal spraying technique, which enables the creation of specific microstructures in thermal barrier coatings (TBCs) used for gas turbine applications. However, the widely varying dimensional scale of pores, ranging from a few nanometers to a few tenths of micrometers, makes it difficult to experimentally measure and analyze porosity in SPS coatings and correlate it with thermal conductivity or other functional characteristics of the TBCs. In this work, an image analysis technique carried out at two distinct magnifications, i.e., low (500×) and high (10,000×), was adopted to analyze the wide range of porosity. Isothermal heat treatment of five different coatings was performed at 1150 °C for 200 h under a controlled atmosphere. Significant microstructural changes, such as inter-columnar spacing widening or coalescence of pores (pore coarsening), closure or densification of pores (sintering) and crystallite size growth, were noticed in all the coatings. The noted changes in thermal conductivity of the coatings following isothermal heat treatment are attributable to sintering, crystallite size growth and pore coarsening

  • 24.
    Ganvir, Ashish
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Kumara, Chamara
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Gupta, Mohit Kumar
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Nylen, Per
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Thermal Conductivity in Suspension Sprayed Thermal Barrier Coatings: Modeling and Experiments2017In: Journal of thermal spray technology (Print), ISSN 1059-9630, E-ISSN 1544-1016, Vol. 26, no 1-2, p. 71-82Article in journal (Refereed)
    Abstract [en]

    Axial suspension plasma spraying (ASPS) can generate microstructures with higher porosity and pores in the size range from submicron to nanometer. ASPS thermal barrier coatings (TBC) have already shown a great potential to produce low thermal conductivity coatings for gas turbine applications. It is important to understand the fundamental relationships between microstructural defects in ASPS coatings such as crystallite boundaries, porosity etc. and thermal conductivity. Object-oriented finite element (OOF) analysis has been shown as an effective tool for evaluating thermal conductivity of conventional TBCs as this method is capable of incorporating the inherent microstructure in the model. The objective of this work was to analyze the thermal conductivity of ASPS TBCs using experimental techniques and also to evaluate a procedure where OOF can be used to predict and analyze the thermal conductivity for these coatings. Verification of the model was done by comparing modeling results with the experimental thermal conductivity. The results showed that the varied scaled porosity has a significant influence on the thermal conductivity. Smaller crystallites and higher overall porosity content resulted in lower thermal conductivity. It was shown that OOF could be a powerful tool to predict and rank thermal conductivity of ASPS TBCs.

  • 25.
    Ganvir, Ashish
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Kumara, Chamara
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Gupta, Mohit Kumar
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Nylén, Per
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Thermal conductivity in suspension sprayed thermal barrier coatings: Modelling and experiments2016In: Proceedings of the International Thermal Spray Conference, Vol. 1, p. 368-374Article in journal (Refereed)
    Abstract [en]

    Axial Suspension Plasma spraying (ASPS) can generate microstructures with higher porosity and pores in the size range from submicron to nanometre. ASPS Thermal Barrier Coatings (TBCs) have already shown a great potential to produce low thermal conductivity coatings for gas turbine applications. It is important to understand the fundamental relationship between microstructural defects in the coating such as grain boundaries, porosity etc. and thermal conductivity. Object Oriented Finite element analysis (OOF) has been shown to be an effective tool for evaluating thermal conductivity for conventional TBCs as this method is capable of incorporating the inherent microstructure as an input to the model. The objective of this work was to analyse the thermal conductivity of ASPS TBCs using experimental techniques and also to evaluate a procedure where OOF can be used to predict and analyse the thermal conductivity for these coatings. Verification of the model was done using experimental thermal conductivity. Results showed that the varied scaled porosity has a significant influence on the thermal conductivity. Smaller grains, higher overall porosity content and lower columnar density resulted in lower thermal conductivity. It was shown that OOF could be a powerful tool to predict and rank thermal conductivity of ASPS TBCs.

  • 26.
    Ganvir, Ashish
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Markocsan, Nicolaie
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Porosity analysis of axial suspension plasma sprayed thermal barrier coatings for gas turbine applications2016Conference paper (Other academic)
  • 27.
    Ganvir, Ashish
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Markocsan, Nicolaie
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Gupta, Mohit Kumar
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Calinas, R.
    Vitorino, N.
    Lukac, F.
    Ekberg, J.
    Chalmers University of Technology, Sweden.
    Influence of suspension characteristics on microstructure of axial suspension plasma-sprayed coatings2017Conference paper (Other academic)
  • 28.
    Ganvir, Ashish
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Markocsan, Nicolaie
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Lukac, F.
    Pala, Z.
    Influence of microstructure on thermo-cyclic fatigue and thermal shock resistance of axial suspension plasma sprayed therm2016Conference paper (Other academic)
  • 29.
    Ganvir, Ashish
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Vaidhyanathan, Venkateswaran
    University West, Department of Engineering Science.
    Markocsan, Nicolaie
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Gupta, Mohit Kumar
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Pala, Zdenek
    Institute of Plasma Physics CAS, Za Slovankou 3, 182 00 Prague, Czech Republic.
    Lukac, Frantisek
    Institute of Plasma Physics CAS, Za Slovankou 3, 182 00 Prague, Czech Republic.
    Failure analysis of thermally cycled columnar thermal barrier coatings produced by high-velocity-air fuel and axial-suspension-plasma spraying: A design perspective2018In: Ceramics International, ISSN 0272-8842, E-ISSN 1873-3956, Vol. 44, no 3, p. 3161-3172Article in journal (Refereed)
    Abstract [en]

    Axial-suspension-plasma spraying (ASPS) is a fairly recent thermal spray technology which enables production of ceramic top coats in TBCs, incorporating simultaneously the properties of both the conventional-plasma sprayed (highly insulating porous structures) and electron-beam-physical-vapor-deposited (strain-tolerant columnar structures) top coats. TBCs are required to insulate the hot components in a gas turbine engine against high temperature and harsh operating conditions. Periodic heating and cooling of turbine engines during operation can create severe thermal cyclic fatigue conditions which can degrade the performance of these coatings eventually leading to the failure. An in-depth experimental investigation was performed to understand the failure behavior of columnar TBCs subjected to thermal cyclic fatigue (TCF) test at 1100 C. The study revealed that the TCF performance was influenced to an extent, by the top coat microstructure, but was primarily affected by the severity of thermally grown oxide (TGO) growth at the bond coat-top coat interface. Mixed failure modes comprising crack propagation through the bond coat-TGO interface, through TGO and within the top coat were identified. Based on the analysis of the experimental results and thorough discussion a novel design of microstructure for the high TCF performance columnar TBC is proposed. © 2017 Elsevier Ltd and Techna Group S.r.l.

  • 30.
    Goel, Sneha
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Hybrid powder-suspension plasma spraying for diverse function-dependent coating architectures2016Independent thesis Advanced level (degree of Master (One Year)), 10 credits / 15 HE creditsStudent thesis
    Abstract [en]

    Suspension Plasma Spraying (SPS) is an emerging plasma spray technique which overcomes the difficulties typically associated with feeding of fine powders (submicron or nano-sized) in conventional Atmospheric Plasma Spraying (APS) to develop interesting microstructural features for varied engineering applications, such as wear resistance, corrosion/oxidation protection, thermal barrier, etc. Another breakthrough in plasma spraying pertains to the advent of systems that allow axial injection of feedstock which considerably improves thermal exchange between the plasma plume and the injected feedstock, thereby enabling substantial enhancement in deposition rates/efficiency.

    The present study utilizes both the above advances in plasma spraying to demonstrate the ability to deposit various function-dependent coating architectures by sequential/simultaneous axial injection of both powder and a suspension feedstock, henceforth referred to as hybrid plasma spray. The results amply demonstrate the flexibility and versatility of the hybrid spray process for production of superior function dependent coating architectures. Sim-ultaneous injection of the two feedstocks to form composite coatings, which is the most challenging from a processing standpoint as it requires identification of a process window which is suitable for both powder and suspension, was investigated in particular detail using deposition of Al2O3-YSZ composites as a case study. Composite coating architectures produced by hybrid spraying showed good homogeneity and the microstructure of the coating was characterized by presence of multi-scale features attributable to co-deposition of powder (micron-sized Al2O3) and suspension (involving fine YSZ powder) feedstock.

    In order to better understand the role of particle size and the implications of a distributed second phase on the tribological behavior of coatings, properties of the above mentioned powder-suspension hybrid coatings were also comprehensively compared with (a) Al2O3 coatings deposited using powder (b) Al2O3 coatings deposited using suspension and (c) Al2O3-YSZ coatings deposited using both constituents as suspensions. It has been observed that fine particle size of the feedstock leads to improved tribological performance of the coating in comparison with micron-sized powder feed-stock. In addition, introduction of fine second phase into conventional coating using the hybrid approach has shown significant improvement in tribological response of the conventional coatings. However introduction of fine second phase in a fine structured coating matrix showed negligible effect on the tribological response of the coating.

  • 31.
    Goel, Sneha
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Björklund, Stefan
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Curry, Nicholas
    Treibacher Ind AG, Althofen, Austria.
    Wiklund, U.
    Uppsala Univ, Dept Technol, Mat Sci Div, S-75121 Uppsala, Swede.
    Joshi, Shrikant V.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Axial suspension plasma spraying of Al2O3 coatings for superior tribological properties2017In: Surface & Coatings Technology, ISSN 0257-8972, E-ISSN 1879-3347, Vol. 315, p. 80-87Article in journal (Refereed)
    Abstract [en]

    Suspension plasma spray is a relatively new thermal spray technique which enables feeding of fine powder to produce advanced coatings for varied applications. This work investigates the difference in structure and performance of Al2O3 coatings manufactured using conventional micron-sized powder feedstock and a suspension of sub-micron to few micron sized powder. Axial injection was implemented for deposition in both cases. The effect of feedstock size and processing on the tribological performance of the two coatings was of specific interest. The coatings were characterized by Optical and Scanning Electron Microscopy, micro-hardness and scratch resistance testing, and their dry sliding wear performance evaluated. The suspension sprayed coatings yielded significantly higher scratch resistance, lower friction coefficient and reduced wear rate compared to conventional coatings. The improved tribological behaviour of the former is attributable to finer porosity, smaller splat sizes, and improved interlamellar bonding. (C) 2017 Elsevier B.V. All rights reserved.

  • 32.
    Goel, Sneha
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Björklund, Stefan
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Joshi, Shrikant
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Deposition of Novel Composite Coatings by Suspension-Powder Hybrid Plasma Spraying2016In: The 7th International Swedish Production Symposium, SPS16, Conference Proceedings: 25th – 27th of October 2016, Lund: Swedish Production Academy , 2016, p. 1-8Conference paper (Refereed)
    Abstract [en]

    Suspension Plasma Spray (SPS) is an emerging technique which overcomes the difficulties typically associated with feeding of fine (submicron or nano-sized) powders in conventional atmospheric plasma spraying (APS) to obtain superior coating properties for various engineering applications. The advent of plasma spray systems that allow axial injection of feedstock, which considerably improves thermal exchange between the plasma plume and the injected feedstock, has enabled substantial enhancement in deposition rates/efficiencies to make SPS techno-commercially exciting. The present study utilizes both the above advances in plasma spraying to demonstrate the ability to deposit novel coating architectures by sequential/simultaneous axial injection of both powder and a suspension feedstock. The results reveal that composite coatings uniquely combining the micron-size features arising from the spray-grade powder and the submicron or nano-sized features attributable to the suspension, can be conveniently realized using the above approach. Three different kinds of coating architectures were generated, namely layered, composite, and functionally graded. The sprayed coatings were extensively characterized for attributes such as surface morphology, microstructure, and composition particularly in the case of composite coatings.

  • 33.
    Guerin, Elie
    et al.
    National School of Engineers, University of Limoges, Limoges, France.
    Sadeghimeresht, Esmaeil
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Markocsan, Nicolaie
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Joshi, Shrikant V.
    University West, Department of Engineering Science, Research Enviroment Production Technology West.
    Role of Chemistry on Corrosion Behavior of Various Ni-based HVAF-Sprayed Coatings in Simulated Boiler Environments2017Conference paper (Other academic)
  • 34.
    Gupta, Mohit Kumar
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Design of Thermal Barrier Coatings: A Modelling Approach2015Book (Other academic)
    Abstract [en]

    This book details the relationships between microstructure, interface roughness, and properties of thermal barrier coatings. The author proposes a method for the reduction of the thermal conductivity of the ceramic layer in order to increase the lifetime of thermal barrier coatings. He includes models for the optimization of ceramic layer microstructure and interface roughness.

  • 35.
    Gupta, Mohit Kumar
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Spraying of solid oxide fuel cells2016Conference paper (Other academic)
  • 36.
    Gupta, Mohit Kumar
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Eriksson, Robert
    Linköping University, Linköping, Sweden.
    Sand, Ulf
    EDR Medeso, Västerås, Sweden.
    Nylén, Per
    University West, Department of Engineering Science, Division of Production Engineering.
    A Diffusion-based Oxide Layer Growth Model using Real Interface Roughness in Thermal Barrier Coatings for Lifetime Assessment2015In: Surface & Coatings Technology, ISSN 0257-8972, E-ISSN 1879-3347, Vol. 271, no June, p. 181-191Article in journal (Refereed)
    Abstract [en]

    The development of thermo-mechanical stresses during thermal cycling can lead to the formation of detrimental cracks in Atmospheric Plasma Sprayed (APS) Thermal Barrier Coatings systems (TBCs). These stresses are significantly increased by the formation of a Thermally Grown Oxide (TGO) layer that forms through the oxidation of mainly aluminium in the bondcoat layer of the TBC. As shown in previous work done by the authors, the topcoat-bondcoat interface roughness plays a major role in the development of the stress profile in the topcoat and significantly affects the lifetime of TBCs. This roughness profile varies as the TGO layer grows and changes the stress profile in the topcoat leading to crack propagation and thus failure.

    In this work, a two-dimensional TGO growth model is presented, based on oxygen and aluminium diffusion-reaction equations, using real interface profiles extracted from cross-section micrographs. The model was first validated by comparing the TGO profiles artificially created by the model to thermally cycled specimens with varying interface roughness. Thereafter, stress profiles in the TBC system, before and after the TGO layer growth, were estimated using a finite element modelling model described in previous work done by the authors. Three experimental specimens consisting of the same chemistry but with different topcoat-bondcoat interface roughness were studied by the models and the stress state was compared to the lifetimes measured experimentally. The combination of the two models described in this work was shown to be an effective approach to assess the stress behaviour and lifetime of TBCs in a comparative way.

  • 37.
    Gupta, Mohit Kumar
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Kuhn, J.
    Kesler, O.
    Markocsan, Nicolaie
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Influence of Process Parameters on Microstructure and Permeability of Axial Suspension Plasma Sprayed Electrolytes in SOFCs2016Conference paper (Other academic)
  • 38.
    Gupta, Mohit Kumar
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Kumara, Chamara
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Nylén, Per
    University West, Department of Engineering Science, Research Enviroment Production Technology West. University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Bilayer Suspension Plasma-Sprayed Thermal Barrier Coatings with Enhanced Thermal Cyclic Lifetime: Experiments and Modeling2017In: Journal of thermal spray technology (Print), ISSN 1059-9630, E-ISSN 1544-1016, Vol. 26, no 6, p. 1038-1051Article in journal (Refereed)
    Abstract [en]

    Suspension plasma spraying (SPS) has been shown as a promising process to produce porous columnar strain tolerant coatings for thermal barrier coatings (TBCs) in gas turbine engines. However, the highly porous structure is vulnerable to crack propagation, especially near the topcoat-bondcoat interface where high stresses are generated due to thermal cycling. A topcoat layer with high toughness near the topcoat-bondcoat interface could be beneficial to enhance thermal cyclic lifetime of SPS TBCs. In this work, a bilayer coating system consisting of first a dense layer near the topcoat-bondcoat interface followed by a porous columnar layer was fabricated by SPS using Yttria-stabilised zirconia suspension. The objective of this work was to investigate if the bilayer topcoat architecture could enhance the thermal cyclic lifetime of SPS TBCs through experiments and to understand the effect of the column gaps/vertical cracks and the dense layer on the generated stresses in the TBC during thermal cyclic loading through finite element modeling. The experimental results show that the bilayer TBC had significantly higher lifetime than the single-layer TBC. The modeling results show that the dense layer and vertical cracks are beneficial as they reduce the thermally induced stresses which thus increase the lifetime.

  • 39.
    Gupta, Mohit Kumar
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Markocsan, Nicolaie
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Li, X. -H
    Siemens Industrial Turbomachinery AB, Finspång, Sweden.
    Östergren, Lars
    GKN Aerospace, Trollhättan, Sweden.
    Influence of Bondcoat Spray Process on Lifetime of Suspension Plasma-Sprayed Thermal Barrier Coatings2018In: Journal of thermal spray technology (Print), ISSN 1059-9630, E-ISSN 1544-1016, Vol. 27, no 1-2, p. 84-97Article in journal (Refereed)
    Abstract [en]

    Development of thermal barrier coatings (TBCs) manufactured by suspension plasma spraying (SPS) is of high commercial interest as SPS has been shown capable of producing highly porous columnar microstructures similar to the conventionally used electron beam–physical vapor deposition. However, lifetime of SPS coatings needs to be improved further to be used in commercial applications. The bondcoat microstructure as well as topcoat–bondcoat interface topography affects the TBC lifetime significantly. The objective of this work was to investigate the influence of different bondcoat deposition processes for SPS topcoats. In this work, a NiCoCrAlY bondcoat deposited by high velocity air fuel (HVAF) was compared to commercial vacuum plasma-sprayed NiCoCrAlY and PtAl diffusion bondcoats. All bondcoat variations were prepared with and without grit blasting the bondcoat surface. SPS was used to deposit the topcoats on all samples using the same spray parameters. Lifetime of these samples was examined by thermal cyclic fatigue testing. Isothermal heat treatment was performed to study bondcoat oxidation over time. The effect of bondcoat deposition process and interface topography on lifetime in each case has been discussed. The results show that HVAF could be a suitable process for bondcoat deposition in SPS TBCs.

  • 40.
    Gupta, Mohit Kumar
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Markocsan, Nicolaie
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Li, X.
    Kjellman, B.
    Effect of bondcoat and substrate chemistry on oxide growth and lifetime in suspension plasma sprayed thermal barrier coatings2017Conference paper (Other academic)
  • 41.
    Gupta, Mohit Kumar
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Markocsan, Nicolaie
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Li, X-H
    Influence of topcoat-bondcoat interface on lifetime in suspension sprayed therma barrier coatings2016Conference paper (Other academic)
  • 42.
    Gupta, Mohit Kumar
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Markocsan, Nicolaie
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Li, Xin-Hai
    Siemens Industrial Turbomachinery AB, Finspong, Sweden.
    Peng, Ru Lin
    Linköping University, Linköping, Sweden.
    Improving the lifetime of suspension plasma sprayed thermal barrier coatings2017In: Surface & Coatings Technology, ISSN 0257-8972, E-ISSN 1879-3347, Vol. 332, p. 550-559Article in journal (Refereed)
    Abstract [en]

    Development of thermal barrier coating systems (TBCs) for gas turbine applications allowing higher combustion temperatures is of high interest since it results in higher fuel efficiency and lower emissions. TBCs produced by suspension plasma spraying (SPS) have been shown to exhibit significantly lower thermal conductivity as compared to conventional systems due to their very fine porosity microstructure. However they have not been commercialised yet due to low reliability and life expectancy of the coatings. In addition to the initial topcoat microstructure and its sintering resistance, lifetime of a TBC system is highly dependent on bondcoat chemistry as it influences the growth rate of thermally grown oxide (TGO) layer. To enhance the lifetime of SPS TBCs, fundamental understanding of relationships between topcoat microstructure and its evolution with time, bondcoat chemistry, TGO growth rate, and lifetime is essential. The objective of this work was to study the effect of topcoat microstructure evolution and TGO growth rate on lifetime in SPS TBC systems. Experimental MCrAlY bondcoat powders with different aluminium activities were investigated and compared to a commercial bondcoat powder. High velocity air fuel spraying was used for bondcoat deposition while axial-SPS was used for yttria stabilized zirconia topcoat deposition. Lifetime was examined by thermal cyclic fatigue testing. Isothermal heat treatment was performed to study TGO evolution with time. The changes in microstructure of SPS coatings due to sintering under long term exposure at high temperatures were investigated. Different failure modes in SPS TBCs were also examined. The bondcoat with higher aluminium activity resulted in a significantly higher thermal cyclic lifetime of the corresponding TBC as it could have promoted protective alumina layer growth for a longer period of time. The results indicate that the significant changes in topcoat microstructure due to sintering as observed in this work could have a detrimental effect on TBC lifetime. © 2017 Elsevier B.V.

  • 43.
    Gupta, Mohit Kumar
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Markocsan, Nicolaie
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Li, Xin-Hai
    Siemens Industrial Turbomachinery, Finspång, Sweden.
    Östergren, Lars
    GKN Aerospace, Trollhättan, Sweden.
    Development of bondcoat layer for long lifetime suspension plasma sprayed thermal barrier coatings2017In: ISTC 2017: International Thermal Spray Conference & Exposition: abstracts (including proceedings on USB stick), Düsseldorf: DVS Media , 2017, p. 70-Conference paper (Refereed)
    Abstract [en]

    Development of thermal barrier coatings (TBCs) manufactured by suspension plasma spraying (SPS) is of high commercial interest as SPS has been shown capable to produce columnar microstructures similar to the conventionally used electron beam – physical vapour deposition (EB-PVD) process. Moreover, SPS is a significantly cheaper process and can also produce more porous coatings than EB-PVD. However, lifetime of SPS coatings needs to be improved further for them to be applicable in commercial applications.The bondcoat microstructure as well as topcoat-bondcoat interface topography affect the TBC lifetime significantly. The objective of this work was to investigate the feasibility of different bondcoat deposition process for SPS TBCs. In this work, a NiCoCrAlY bondcoat deposited by high velocity air fuel (HVAF) was compared to commercial NiCoCrAlY and PtAl bondcoats. All bondcoat variations were prepared with and without grit blasting the bondcoat surface. SPS was used to deposit the topcoats on all samples using the same spray parameters. Lifetime of these samples was examined by thermal cyclic fatigue and thermal shock testing. The effect of bondcoat deposition process and interface topography on lifetime in each case has been discussed. The results show that HVAF could be a suitable process for bondcoat deposition in SPS TBCs.

  • 44.
    Gupta, Mohit Kumar
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Markocsan, Nicolaie
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Rocchio-Heller, R.
    Oerlikon Metco, Westbury, USA.
    Liu, J.
    Oerlikon Metco, Westbury, USA.
    Li, X. -H
    Siemens Industrial Turbomachinery AB, Finspång, Sweden.
    Östergren, L.
    GKN Aerospace, Trollhättan, Sweden.
    Failure Analysis of Multilayered Suspension Plasma-Sprayed Thermal Barrier Coatings for Gas Turbine Applications2018In: Journal of thermal spray technology (Print), ISSN 1059-9630, E-ISSN 1544-1016Article in journal (Refereed)
    Abstract [en]

    Improvement in the performance of thermal barrier coatings (TBCs) is one of the key objectives for further development of gas turbine applications. The material most commonly used as TBC topcoat is yttria-stabilized zirconia (YSZ). However, the usage of YSZ is limited by the operating temperature range which in turn restricts the engine efficiency. Materials such as pyrochlores, perovskites, rare earth garnets are suitable candidates which could replace YSZ as they exhibit lower thermal conductivity and higher phase stability at elevated temperatures. The objective of this work was to investigate different multilayered TBCs consisting of advanced topcoat materials fabricated by suspension plasma spraying (SPS). The investigated topcoat materials were YSZ, dysprosia-stabilized zirconia, gadolinium zirconate, and ceria–yttria-stabilized zirconia. All topcoats were deposited by TriplexPro-210TM plasma spray gun and radial injection of suspension. Lifetime of these samples was examined by thermal cyclic fatigue and thermal shock testing. Microstructure analysis of as-sprayed and failed specimens was performed with scanning electron microscope. The failure mechanisms in each case have been discussed in this article. The results show that SPS could be a promising route to produce multilayered TBCs for high-temperature applications.

  • 45.
    Gupta, Mohit Kumar
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Markocsan, Nicolaie
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Rocchio-Heller, Riston
    Oerlikon Metco, Westbury, USA.
    Liu, Jing
    Oerlikon Metco, Westbury, USA.
    Li, Xin-Hai
    Siemens Industrial Turbomachinery, Fingspång, Sweden.
    Östergren, Lars
    GKN Aerospace, Trollhättan, Sweden.
    Multilayered suspension plasma sprayed thermal barrier coatings for high temperature gas turbine applications2017In: ISTC 2017: International Thermal Spray Conference & Exposition : abstracts (including proceedings on USB stick), Düsseldorf: DVS Media , 2017, p. 1-6Conference paper (Refereed)
    Abstract [en]

    Improvement in the performance of thermal barrier coating systems (TBCs) is one of the key objectives for further development of gas turbine applications. The material most commonly used as TBC topcoat is yttria stabilised zirconia (YSZ). However, the usage of YSZ is limited by the operating temperature range which in turn restricts the engine efficiency. Materials such as pyrochlores, perovskites, rare earth garnets, etc. are suitable candidates which could replace YSZ as they exhibit lower thermal conductivity and higher phase stability at elevated temperatures.The objective of this work was to investigate different multi-layered TBCs consisting of advanced topcoat materials fabricated by Suspension Plasma Spraying (SPS). The investigated topcoat materials were YSZ, dysprosia stabilised zirconia, gadolinium zirconiate, cerium doped YSZ and yttria fully stabilised zirconia. All topcoats were deposited with TriplexPro-210 plasma spray gun and radial injection of suspension. Lifetime of these samples was examined by thermal cyclic fatigue and thermal shock testing. Microstructure analysis of as-sprayed and failed specimens was performed with scanning electron microscope. The failure mechanisms in each case have been discussed in this article. The results show that SPS could be a promising route to produce multilayered TBCs for high temperature applications.

  • 46.
    Gupta, Mohit Kumar
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Nylén, Per
    University West, Department of Engineering Science, Research Enviroment Production Technology West.
    Design of Low Thermal Conductivity Thermal Barrier Coatings by Finite Element Modelling2011In: Surface Modification Technologies XXIV: SMT24, Dresden, September 7-9, 2010 / [ed] T. S. Sudarshan, Eckhard Beyer, and Lutz-Michael Berger, 2011, p. 353-365Conference paper (Refereed)
    Abstract [en]

    Fundamental understanding of relationships between coating microstructure and thermal conductivity is important to be able to understand the influence of coating defects, such as delaminations and pores, on heat insulation in thermal barrier coatings (TBC). Object Oriented Finite element analysis (OOF) has recently been shown as an effective tool for evaluating thermo-mechanical material behaviour as this method is capable of incorporating the inherent material microstructure as an input to the model. The objective of this work was to evaluate a procedure where this technique is combined with Tbctool, a plasma-sprayed TBC like morphology generator, thus enabling development of low thermal conductivity coatings by simulation. Input parameters for Tbctool were computed from SEM images of sprayed microstructures using the image analysis software, Aphelion. Microstructures for as-sprayed as well as heat treated samples were evaluated. The thermal conductivities of the artificially generated microstructures were determined using OOF. Verification of the modelling procedure was performed by comparing predicted values by OOF with corresponding measured values using the laser flash technique. The results, although tentative in nature, indicate that the proposed simulation approach can be a powerful tool in the development of new low conductivity coatings.

  • 47.
    Gupta, Mohit Kumar
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Nylén, Per
    University West, Department of Engineering Science, Research Enviroment Production Technology West.
    Structure-property Relationships in Thermal Barrier Coatings by Finite Element Modelling2012In: Surface Modification Technologies XXV : proceedings of the Twenty Fifth International Conference on Surface Modification Technologies: SMT25, Trollhättan, June 20-22, 2011 / [ed] T. S. Sudarshan, and P. Nylén, 2012, p. 175-184Conference paper (Refereed)
    Abstract [en]

    The thermal and mechanical properties of Thermal Barrier Coating systems (TBCs) are strongly influenced by coating defects, such as delaminations and pores, thus making it essential to have a fundamental understanding of microstructure-property relationships in TBCs, to produce a desired coating. Object-Oriented Finite element analysis (OOF) has been shown previously as an effective tool for evaluating thermal and mechanical material behaviour, as this method is capable of incorporating the inherent material microstructure as an input to the model. In this work, OOF was used to predict the thermal conductivity and effective Young’s modulus of TBC topcoats. A Design of Experiments (DoE) was conducted by varying selected spray parameters for spraying Yttria Partially Stabilized Zirconia (YPSZ) topcoat. Characterisation of the coatings included microstructure, porosity and crack content and thermal conductivity measurements. The relationships between microstructural features, thermal conductivity and Young’s modulus are discussed.

  • 48.
    Gupta, Mohit Kumar
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Skogsberg, Kristoffer
    University West, Department of Engineering Science.
    Nylén, Per
    University West, Department of Engineering Science, Division of Production Engineering.
    Influence of topcoat-bondcoat interface roughness on stresses and lifetime in Thermal Barrier Coatings2013In: Proceedings of the International Thermal Spray Conference / [ed] Editor: Rogerio S. Lima, Arvind Agarwal, Margaret M. Hyland, Yuk-Chiu Lau, Georg Mauer, André McDonald, and Filofteia-Laura, ASM International, 2013, p. 596-601Conference paper (Refereed)
    Abstract [en]

    Failure in Atmospheric Plasma Sprayed (APS) Thermal Barrier Coatings (TBCs) is associated with the thermomechanical stresses developing due to the Thermally Grown Oxide (TGO) layer growth and thermal expansion mismatch during thermal cycling. The interface roughness has been shown to play a major role in the development of these induced stresses and lifetime of TBCs. Modeling has been shown as an effective tool to understand the effect of interface roughness on induced stresses. In previous work done by the research group, it was observed that APS bondcoats performed better than the bondcoats sprayed with High Velocity OxyFuel (HVOF) process which is contrary to the present literature data. The objective of this work was to understand this observed difference in life-time with the help of finite element modeling by using real surface topographies. Different TGO layer thicknesses were evaluated. The modeling results were also compared with existing theories established on simplified sinusoidal profiles published in earlier works. It was shown that modeling can be used as an effective tool to understand the stress behavior in TBCs with different roughness profiles.

  • 49.
    Gupta, Mohit Kumar
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Skogsberg, Kristoffer
    University West, Department of Engineering Science.
    Nylén, Per
    University West, Department of Engineering Science, Division of Production Engineering.
    Influence of Topcoat-Bondcoat Interface Roughness on Stresses and Lifetime inThermal Barrier Coatings2014In: Journal of thermal spray technology (Print), ISSN 1059-9630, E-ISSN 1544-1016, Vol. 23, no 1-2, p. 170-181Article in journal (Refereed)
    Abstract [en]

    Failure in Atmospheric Plasma Sprayed (APS) Thermal Barrier Coatings (TBCs) is associated with the thermo-mechanical stresses developing due to the Thermally Grown Oxide (TGO) layer growth and thermal expansion mismatch during thermal cycling. The interface roughness has been shown to play a major role in the development of these induced stresses and lifetime of TBCs. Modeling has been shown as an effective tool to understand the effect of interface roughness on induced stresses. In previous work done by our research group, it was observed that APS bondcoats performed better than the bondcoats sprayed with High Velocity Oxy-Fuel (HVOF) process which is contrary to the present literature data. The objective of this work was to understand this observed difference in lifetime with the help of finite element modeling by using real surface topographies. Different TGO layer thicknesses were evaluated. The modeling results were also compared with existing theories established on simplified sinusoidal profiles published in earlier works. It was shown that modeling can be used as an effective tool to understand the stress behavior in TBCs with different roughness profiles.

  • 50.
    Gupta, Mohit Kumar
    et al.
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Weber, André
    Karlsruhe Institute of Technology, Germany.
    Markocsan, Nicolaie
    University West, Department of Engineering Science, Division of Subtractive and Additive Manufacturing.
    Gindrat, Malko
    Oerlikon Metco, Switzerland.
    Electrochemical Performance of Plasma Sprayed Metal Supported Planar Solid Oxide Fuel Cells2016In: Journal of the Electrochemical Society, ISSN 0013-4651, E-ISSN 1945-7111, Vol. 163, no 9, p. F1059-F1065Article in journal (Refereed)
    Abstract [en]

    High production cost is one of the major barriers to widespread commercialization of solid oxide fuel cells (SOFCs). Thermal spraytechniques are a low cost alternative for the production of SOFCs. The objective of this work was to evaluate the electrochemicalperformance of cells produced by plasma spraying. The anode was deposited on a porous metallic support by atmospheric plasmaspraying (APS) whereas the electrolyte was deposited by plasma spray-thin film (PS-TF) technique, which can produce thin anddense coatings at high deposition rates. The cathode was deposited by screen-printing and in-operando sintering. The electrochemicaltests were performed at 650–800◦C. Current-voltage characteristics and impedance spectra were measured and analyzed. The impactof electrolyte composition and layer thickness on the gas tightness of the electrolyte and the area specific resistance of the cell isdiscussed. The results show that the applied thermal spraying techniques are a potential alternative for producing SOFCs.

1234 1 - 50 of 152
CiteExportLink to result list
Permanent link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf