Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Study of the effect of tool geometry on semisolid stir welding of a AZ91 magnesium alloy
Högskolan Väst, Institutionen för ingenjörsvetenskap, Avd för tillverkningsprocesser. (PTW)ORCID-id: 0000-0001-6242-3517
Materials Science and Engineering Dep., Sharif University of Technology, Tehran, Iran.
Materials Science and Engineering Dep., Sharif University of Technology, Tehran, Iran.
2015 (Engelska)Ingår i: Proceedings of the 18th International Conference on Joining Materials, JOM-Institute , 2015, s. 1-10Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

Semisolid stir welding is a newly developed method suitable for joining of the magnesium alloy AZ91. In this study, the effect of tool geometries on the joint properties such as bending strength and the occurrence of porosity are studied. A 2 mm-thick Mg-25%Zn interlayer was placed between two AZ91 plates and the plate was heated up to 530°C before joining. At this temperature, when both the interlayer and the base metal were in the semisolid state, a stirrer was introduced into the joint. Drill-tip and round shape stirrer tools were employed at three different stirring rates. Welds produced with the two methods showed similar properties in the shear punch test. However, using the round tool geometry resulted in welds with excellent bending strength closely matching that of the base metal especially at the highest stirring rate. The improved properties when using the round tool was a result of the formation of a very fine and uniform microstructure with a low content of porosity.

Ort, förlag, år, upplaga, sidor
JOM-Institute , 2015. s. 1-10
Serie
JOM, ISSN 2246-0160
Nyckelord [en]
Tool shape, semisolid joining, bending test, magnesium alloys
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik Metallurgi och metalliska material
Forskningsämne
TEKNIK, Produktions- och materialteknik; Produktionsteknik
Identifikatorer
URN: urn:nbn:se:hv:diva-9201OAI: oai:DiVA.org:hv-9201DiVA, id: diva2:911380
Konferens
JOM-18, 18th International Conference on Joining Materials, Helsingör, Denmark, April 26-29, 2015
Tillgänglig från: 2016-03-11 Skapad: 2016-03-08 Senast uppdaterad: 2018-08-12Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Personposter BETA

Hosseini, Vahid A.

Sök vidare i DiVA

Av författaren/redaktören
Hosseini, Vahid A.
Av organisationen
Avd för tillverkningsprocesser
Bearbetnings-, yt- och fogningsteknikMetallurgi och metalliska material

Sök vidare utanför DiVA

GoogleGoogle Scholar

urn-nbn

Altmetricpoäng

urn-nbn
Totalt: 117 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf