Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Effect of Different Solution Heat Treatments on the Hot Ductility of Superalloys: Part 3 - Waspaloy
Högskolan Väst, Institutionen för ingenjörsvetenskap, Avd för tillverkningsprocesser. Department of Materials Technology, GKN Aerospace Engine Systems, Trollhättan, Sweden och Department of Materials and Manufacturing Technology, Chalmers University of Technology, Gothenburg, Sweden. (PTW)ORCID-id: 0000-0001-9065-0741
Department of Materials Technology, GKN Aerospace Engine Systems, Trollhättan, Sweden och Department of Materials and Manufacturing Technology, Chalmers University of Technology, Gothenburg, Sweden.
Department of Applied Physics, Chalmers University of Technology, Gothenburg, Sweden.
Department of Mechanical and Industrial Engineering, University of Manitoba, Winnipeg, MB, Canada.
2013 (Engelska)Ingår i: Materials Science and Technology, ISSN 0267-0836, E-ISSN 1743-2847, Vol. 29, nr 1, s. 43-53Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

The susceptibility to heat affected zone cracking of Waspaloy has been investigated in terms of its hot ductility, measured as the reduction of area (RA). Gleeble testing with on-heating as well as on-cooling test cycles was carried out to illuminate the influence of different 4 h solution heat treatments between 996 and 1080°C. A ductility maximum of between 80 and 90%RA was found at 1050–1100°C for all conditions in the on-heating tests. Although the different heat treatment conditions showed similar macrohardness, the particle size and distribution of the γ′ and M23C6 phases differed, which significantly affected the on-heating ductility in the lower temperature test region. The ductile to brittle transition was initiated at 1100°C in the on-heating testing with indications of grain boundary liquation at the higher test temperatures. Ductility recovery, as measured in the on-cooling tests from 1240°C, was very limited with <30%RA for all conditions and test temperatures except for the 1080°C/4 h treatment, which exhibited 60%RA at 980°C.

Ort, förlag, år, upplaga, sidor
2013. Vol. 29, nr 1, s. 43-53
Nyckelord [en]
Waspaloy, hot ductility, gleeble testing
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik Metallurgi och metalliska material
Forskningsämne
Produktionsteknik; TEKNIK, Produktions- och materialteknik
Identifikatorer
URN: urn:nbn:se:hv:diva-9003DOI: 10.1179/1743284712Y.0000000108OAI: oai:DiVA.org:hv-9003DiVA, id: diva2:900786
Tillgänglig från: 2016-02-05 Skapad: 2016-02-05 Senast uppdaterad: 2019-05-03Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltext

Personposter BETA

Andersson, Joel

Sök vidare i DiVA

Av författaren/redaktören
Andersson, Joel
Av organisationen
Avd för tillverkningsprocesser
I samma tidskrift
Materials Science and Technology
Bearbetnings-, yt- och fogningsteknikMetallurgi och metalliska material

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 333 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf