Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Influence of Microstructure on Thermal Properties of Axial Suspension Plasma-Sprayed YSZ Thermal Barrier Coatings
Högskolan Väst, Institutionen för ingenjörsvetenskap, Avd för tillverkningsprocesser. (PTW)ORCID-id: 0000-0003-1897-0171
Högskolan Väst, Institutionen för ingenjörsvetenskap, Avd för maskinteknik. (PTW)ORCID-id: 0000-0003-0209-1332
Högskolan Väst, Institutionen för ingenjörsvetenskap, Avd för industriell produktion. (PTW)ORCID-id: 0000-0002-9578-4076
Högskolan Väst, Institutionen för ingenjörsvetenskap, Avd för industriell produktion. (PTW)ORCID-id: 0000-0001-7787-5444
Visa övriga samt affilieringar
2016 (Engelska)Ingår i: Journal of thermal spray technology (Print), ISSN 1059-9630, E-ISSN 1544-1016, Vol. 25, nr 1-2, s. 202-212Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Suspension plasma spraying is a relatively new thermal spaying technique to produce advanced thermal barrier coatings (TBCs) and enables production of coatings with a variety of structures—highly dense, highly porous, segmented, or columnar. This work investigates suspension plasma-sprayed TBCs produced using axial injection with different process parameters. The influence of coating microstructure on thermal properties was of specific interest. Tests carried out included microstructural analysis, phase analysis, determination of porosity, and pore size distribution, as well as thermal diffusivity/conductivity measurements. Results showed that axial suspension plasma spraying process makes it possible to produce various columnar-type coatings under different processing conditions. Significant influence of microstructural features on thermal properties of the coatings was noted. In particular, the process parameter-dependent microstructural attributes, such as porosity, column density, and crystallite size, were shown to govern the thermal diffusivity and thermal conductivity of the coating.

Ort, förlag, år, upplaga, sidor
2016. Vol. 25, nr 1-2, s. 202-212
Nyckelord [en]
axial injection, columnar microstructure, porosity, suspension plasma spraying, thermal conductivity, thermal diffusivity
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik
Forskningsämne
TEKNIK, Produktions- och materialteknik; Produktionsteknik
Identifikatorer
URN: urn:nbn:se:hv:diva-8737DOI: 10.1007/s11666-015-0355-7ISI: 000374268000021Scopus ID: 2-s2.0-84953637268OAI: oai:DiVA.org:hv-8737DiVA, id: diva2:875496
Tillgänglig från: 2015-12-01 Skapad: 2015-12-01 Senast uppdaterad: 2018-05-23Bibliografiskt granskad
Ingår i avhandling
1. Microstructure and Thermal Conductivity of Liquid Feedstock Plasma Sprayed Thermal Barrier Coatings
Öppna denna publikation i ny flik eller fönster >>Microstructure and Thermal Conductivity of Liquid Feedstock Plasma Sprayed Thermal Barrier Coatings
2016 (Engelska)Licentiatavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

Thermal barrier coating (TBC) systems are widely used on gas turbine components to provide thermal insulation and oxidation protection. TBCs, incombination with advanced cooling, can enable the gas turbine to operate at significantly higher temperatures even above the melting temperature of the metallic materials. There is a permanent need mainly of environmental reasons to increase the combustion turbine temperature, hence new TBC solutions are needed.By using a liquid feedstock in thermal spraying, new types of TBCs can be produced. Suspension plasma/flame or solution precursor plasma spraying are examples of techniques that can be utilized for liquid feedstock thermal spraying.This approach of using suspension and solution feedstock, which is an alternative to the conventional solid powder feed stock spraying, is gaining increasing research interest, since it has been shown to be capable of producing coatings with superior coating performance.The objective of this research work was to explore relationships between process parameters, coating microstructure, thermal diffusivity and thermal conductivity in liquid feedstock thermal sprayed TBCs. A further aim was to utilize this knowledge to produce a TBC with lower thermal diffusivity and lower thermal conductivity compared to state-of-the-art in industry today, i.e. solid feed stock plasma spraying. Different spraying techniques, suspension high velocity oxy fuel,solution precursor plasma and suspension plasma spraying (with axial and radialfeeding) were explored and compared with solid feedstock plasma spraying.A variety of microstructures, such as highly porous, vertically cracked and columnar, were obtained. It was shown that there are strong relationships between the microstructures and the thermal properties of the coatings.Specifically axial suspension plasma spraying was shown as a very promising technique to produce various microstructures as well as low thermal diffusivity and low thermal conductivity coatings.

Ort, förlag, år, upplaga, sidor
Trollhättan: University West, 2016. s. 58
Serie
Licentiate Thesis: University West ; 9
Nyckelord
Microstructure, Thermal Barrier Coating; Axial Injection; Suspension Plasma Spraying; Suspension High Velocity Oxy Fuel Spraying; Solution Precursor Plasma Spraying; Porosity; Thermal Diffusivity; Thermal Conductivity
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik
Forskningsämne
Produktionsteknik
Identifikatorer
urn:nbn:se:hv:diva-9061 (URN)978-91-87531-18-7 (ISBN)978-91-87531-19-4 (ISBN)
Opponent
Handledare
Tillgänglig från: 2016-02-11 Skapad: 2016-02-10 Senast uppdaterad: 2016-02-12Bibliografiskt granskad
2. Design of Suspension Plasma Sprayed Thermal Barrier Coatings
Öppna denna publikation i ny flik eller fönster >>Design of Suspension Plasma Sprayed Thermal Barrier Coatings
2018 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

Thermal barrier coatings (TBCs) are widely used on gas turbine components to provide thermal insulation, which in combination with advanced cooling, can enable the gas turbine to operate at significantly higher temperatures even above the melting temperature of the metallic components. There is a permanent need,mainly due to environmental reasons, to increase the combustion temperature inturbines, hence new TBC solutions are needed. By using a liquid feedstock in thermal spraying, new types of TBCs can be produced. Suspension plasma/flame or solution precursor plasma spraying are examples of techniques that can be utilized for liquid feedstock thermal spraying. This approach of using suspension and solution feedstock, which is an alternative to the conventional solid powder feedstock spraying, is gaining increasing research interest since it has been shown to be capable of producing coatings withsuperior performance. The objective of this research work was to identify relationships between process parameters, coating microstructure, thermal conductivity and lifetime in suspension plasma sprayed TBCs. A further objective was to utilize these relationships to enable tailoring of the TBC microstructure for superior performance compared to state-of-the-art TBC used in industry today, i.e. solid feedstock plasma sprayed TBCs. Different spraying techniques, namely suspension high velocity oxy fuel, solution precursor plasma and suspension plasma spraying (with axial and radial feeding) were explored and compared to solid feedstock plasma spraying. A variety of microstructures, such as highly porous, vertically cracked and columnar, were produced and investigated. It was shown that there are strong relationships between microstructure, thermo-mechanical properties and performance of the coatings. Specifically, axial suspension plasma spraying wasshown as a very promising technique to produce various microstructures as wellas highly durable coatings. Based on the experimental results, a tailored columnar microstructure design for a superior TBC performance is also proposed.

Ort, förlag, år, upplaga, sidor
Trollhättan: University West, 2018. s. 96
Serie
PhD Thesis: University West ; 20
Nyckelord
Microstructure; Thermal Barrier Coatings; Axial Injection; Suspension Plasma Spraying; Porosity; Thermal Conductivity; Fracture Toughness; Lifetime
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik
Forskningsämne
Produktionsteknik; TEKNIK, Produktions- och materialteknik
Identifikatorer
urn:nbn:se:hv:diva-12336 (URN)978-91-87531-92-7 (ISBN)978-91-87531-91-0 (ISBN)
Disputation
2018-06-15, F104, University West, Trollhättan, 10:15 (Engelska)
Opponent
Handledare
Tillgänglig från: 2018-05-25 Skapad: 2018-05-23 Senast uppdaterad: 2018-05-25

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus

Personposter BETA

Ganvir, AshishCurry, NicholasMarkocsan, NicolaieNylén, PerJoshi, Shrikant

Sök vidare i DiVA

Av författaren/redaktören
Ganvir, AshishCurry, NicholasMarkocsan, NicolaieNylén, PerJoshi, Shrikant
Av organisationen
Avd för tillverkningsprocesserAvd för maskinteknikAvd för industriell produktionForskningsmiljön produktionsteknik(PTW)
I samma tidskrift
Journal of thermal spray technology (Print)
Bearbetnings-, yt- och fogningsteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 413 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf