Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Study on temperature influence on lack of fusion formation in spatter/base metal interface
Högskolan Väst, Institutionen för ingenjörsvetenskap, Avd för maskinteknik. Högskolan Väst, Institutionen för ingenjörsvetenskap, Avd för industriell produktion. (PTW)
Högskolan Väst, Institutionen för ingenjörsvetenskap, Avd för tillverkningsprocesser. (PTW)ORCID-id: 0000-0003-2560-0531
Högskolan Väst, Institutionen för ingenjörsvetenskap, Avd för tillverkningsprocesser. (PTW)ORCID-id: 0000-0002-9578-4076
2014 (Engelska)Ingår i: Advanced Materials Research, ISSN 1022-6680, E-ISSN 1662-8985, Vol. 875 - 877, s. 1421-1428Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

In the development of modern welded structures with longer life-time and/or higher load-carrying ability, fatigue properties are becoming more and more important. A lot of researches have been done to investigate which factors can elongate the fatigue life of weldments. Cold lap defects, were found to be important initiation sites of the fatigue failure in 1990s. In the ISO standard, cold lap is referred to as a type of micro-lack of fusion. Previous study found that most of the cold laps in GMAW process are formed in spatters. In this paper the interface of spatter/base metal was cut, polished and investigated by conventional metallographic methods. The aim is to reveal the influence of temperature on cold lap formation. In the experiments, different pre-heating temperatures of the parent plate were used in tandem GMAW. Results showed linear empirical relationship between the temperature of the parent plate and the amount of lack of fusion in the spatter/base metal interface.

Ort, förlag, år, upplaga, sidor
2014. Vol. 875 - 877, s. 1421-1428
Nyckelord [en]
Cold Lap, EDS, GMAW, Lack-of-Fusion (LOF), Manganese, Oxides, SEM, Silicon, Spatter, Temperature
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik
Forskningsämne
TEKNIK, Produktions- och materialteknik
Identifikatorer
URN: urn:nbn:se:hv:diva-4665DOI: 10.4028/www.scientific.net/AMR.875-877.1421OAI: oai:DiVA.org:hv-4665DiVA, id: diva2:556201
Konferens
International Conference on Frontiers of Mechanical Engineering,Materials and Energy(ICFMEME 2012)
Projekt
WIQ and SUMANTillgänglig från: 2012-09-24 Skapad: 2012-09-24 Senast uppdaterad: 2020-04-02Bibliografiskt granskad
Ingår i avhandling
1. Cold lap formation in Gas Metal Arc Welding of steel: An experimental study of micro-lack of fusion defects
Öppna denna publikation i ny flik eller fönster >>Cold lap formation in Gas Metal Arc Welding of steel: An experimental study of micro-lack of fusion defects
2013 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

Cold laps are defined as micro-lack of fusion defects at the weld toe more or less parallel to the surface of the parent plate. These defects are known to negatively influence the fatigue properties of weldments. Previous studies suggest that cold lap formation can not be avoided completely in Gas Metal Arc Welding (GMAW). Therefore, a better understanding of formation mechanisms is imperative to be able to minimize the number and size of these defects. The main objective of this work has been to provide a more comprehensive understanding of cold laps, including categorising, characterisation and defining the most significant factors for formation. GMAW was used to produce welds that were investigated by metallographic methods using light optical microscopy, scanning electron microscopy and energy dispersive spectrometry. A novel classification of cold laps was introduced and three types of cold laps were identified: spatter cold laps, overlap cold laps and spatter-overlap cold laps. It was shown that cold laps are partially or fully filled by oxides. The most common oxides are manganese silicon oxides which were concluded to be formed primarily by oxidation of droplets. The presence of oxides was found to significantly increase the tendency to form spatter cold laps as well as overlap cold laps. Particularly for overlap cold laps, it was found that the depth (in transverse direction of weld) is reduced when welding in a non-oxidising environment. Welding on blasted surfaces increased the cold lap formation by entrapment of gas. The droplet and base metal temperatures were also found to be significant factors in cold lap formation. For overlap cold laps the occurrence frequency decreased with increased preheating temperature of the base metal. Mechanisms of overflowing resulting in overlap cold laps were discussed based on an extensive literature review. Several phenomena are believed to contribute to overflow including Rayleigh instability, the balance of forces, transfer of lateral momentum by droplets and an outward Marangoni fluid flow of the weld pool.

The present studies suggest that cold lap formation can be suppressed by ensuring that the welding process (arc) is as stable as possible and by welding on a preheated work piece in a non-oxidising environment.

Ort, förlag, år, upplaga, sidor
Trollhättan: University West, 2013. s. 54
Serie
PhD Thesis: University West ; 2
Nyckelord
Tandem GMAW, old laps, lack of fusion, Spatter, Overlap, Overflow, Manganese, Silicon, Oxides, Temperature
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik
Forskningsämne
TEKNIK, Produktions- och materialteknik
Identifikatorer
urn:nbn:se:hv:diva-5596 (URN)978-91-977943-6-7 (ISBN)978-91-977943-5-0 (ISBN)
Disputation
2013-09-24, C118, Högskolan Väst/University West, Trollhättan, 11:10 (Engelska)
Opponent
Handledare
Tillgänglig från: 2013-09-17 Skapad: 2013-09-17 Senast uppdaterad: 2023-04-05Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltext

Person

Li, PeigangSvensson, Lars-ErikMarkocsan, Nicolaie

Sök vidare i DiVA

Av författaren/redaktören
Li, PeigangSvensson, Lars-ErikMarkocsan, Nicolaie
Av organisationen
Avd för maskinteknikAvd för industriell produktionAvd för tillverkningsprocesser
I samma tidskrift
Advanced Materials Research
Bearbetnings-, yt- och fogningsteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 689 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf