Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Effect of microstructure on the impact toughness of a cold work tool steel
Högskolan Väst, Institutionen för ingenjörsvetenskap, Forskningsmiljön produktionsteknik(PTW). Dept. of Material Technology, Uddeholms AB, Hagfors, Sweden. (PTW)ORCID-id: 0000-0001-6300-5923
2014 (Engelska)Ingår i: Sonderbände der Praktischen Metallographie: Proceedings of 14th International Metallography Conference 2014, Montanauniversitet, Leoben, Österrike, 17-19 sept 2014, Riederer , 2014, Vol. 46, s. 307-312Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

The effect of different combination of austenitization temperatures and tempering treatments on microstructure and impact toughness has been studied for the cold work tool steel -Uddeholm Caldie. This is a chromium, vanadium and molybdenum alloyed tool steel with approximately 0.7 wt.% C. It is used as a tool in industrial applications such as cutting, punching, shearing, forming, drawing and extrusion. A combination of high hardness and adequate toughness is required to withstand the common tool failure modesof chipping and cracking.Retained austenite content, hardness and prior austenite grain size were measured. The impact toughness was determined for un-notched impact test specimens. The microstructure and fracture surfaces of impact tested samples were characterized both macroscopically and microscopically. Scanning Electron Microscopy, Light Optical Microscopy and X-Ray Diffraction measurements were used. Higher austenitization temperatures resulted in larger amounts of retained austenite and higher hardness. A higher austenitization temperature also caused coarsening of austenite grains and resulted in reduced toughness. Impact specimens austenitized and tempered at lower temperatures were found to have better toughness than those at high austenitization and tempering temperatures.

Ort, förlag, år, upplaga, sidor
Riederer , 2014. Vol. 46, s. 307-312
Nyckelord [en]
Impact toughness, hardness, Temperature
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik
Forskningsämne
Produktionsteknik; TEKNIK, Produktions- och materialteknik
Identifikatorer
URN: urn:nbn:se:hv:diva-9279ISBN: 978-3-88355-403-7 (tryckt)OAI: oai:DiVA.org:hv-9279DiVA, id: diva2:916427
Konferens
14th International Metallography Conference 2014, Montanauniversitet, Leoben, Österrike, 17-19 sept 2014
Tillgänglig från: 2016-04-02 Skapad: 2016-04-02 Senast uppdaterad: 2019-11-29Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Person

Rehan, Arbab

Sök vidare i DiVA

Av författaren/redaktören
Rehan, Arbab
Av organisationen
Forskningsmiljön produktionsteknik(PTW)
Bearbetnings-, yt- och fogningsteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

isbn
urn-nbn

Altmetricpoäng

isbn
urn-nbn
Totalt: 250 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf