Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Design of Suspension Plasma Sprayed Thermal Barrier Coatings
Högskolan Väst, Institutionen för ingenjörsvetenskap, Avdelningen för avverkande och additativa tillverkningsprocesser (AAT). (PTW)ORCID-id: 0000-0003-1897-0171
2018 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

Thermal barrier coatings (TBCs) are widely used on gas turbine components to provide thermal insulation, which in combination with advanced cooling, can enable the gas turbine to operate at significantly higher temperatures even above the melting temperature of the metallic components. There is a permanent need,mainly due to environmental reasons, to increase the combustion temperature inturbines, hence new TBC solutions are needed. By using a liquid feedstock in thermal spraying, new types of TBCs can be produced. Suspension plasma/flame or solution precursor plasma spraying are examples of techniques that can be utilized for liquid feedstock thermal spraying. This approach of using suspension and solution feedstock, which is an alternative to the conventional solid powder feedstock spraying, is gaining increasing research interest since it has been shown to be capable of producing coatings withsuperior performance. The objective of this research work was to identify relationships between process parameters, coating microstructure, thermal conductivity and lifetime in suspension plasma sprayed TBCs. A further objective was to utilize these relationships to enable tailoring of the TBC microstructure for superior performance compared to state-of-the-art TBC used in industry today, i.e. solid feedstock plasma sprayed TBCs. Different spraying techniques, namely suspension high velocity oxy fuel, solution precursor plasma and suspension plasma spraying (with axial and radial feeding) were explored and compared to solid feedstock plasma spraying. A variety of microstructures, such as highly porous, vertically cracked and columnar, were produced and investigated. It was shown that there are strong relationships between microstructure, thermo-mechanical properties and performance of the coatings. Specifically, axial suspension plasma spraying wasshown as a very promising technique to produce various microstructures as wellas highly durable coatings. Based on the experimental results, a tailored columnar microstructure design for a superior TBC performance is also proposed.

Ort, förlag, år, upplaga, sidor
Trollhättan: University West , 2018. , s. 96
Serie
PhD Thesis: University West ; 20
Nyckelord [en]
Microstructure; Thermal Barrier Coatings; Axial Injection; Suspension Plasma Spraying; Porosity; Thermal Conductivity; Fracture Toughness; Lifetime
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik
Forskningsämne
Produktionsteknik; TEKNIK, Produktions- och materialteknik
Identifikatorer
URN: urn:nbn:se:hv:diva-12336ISBN: 978-91-87531-92-7 (tryckt)ISBN: 978-91-87531-91-0 (digital)OAI: oai:DiVA.org:hv-12336DiVA, id: diva2:1209589
Disputation
2018-06-15, F104, University West, Trollhättan, 10:15 (Engelska)
Opponent
Handledare
Tillgänglig från: 2018-05-25 Skapad: 2018-05-23 Senast uppdaterad: 2018-05-25
Delarbeten
1. Characterization of Thermal Barrier Coatings Produced by Various Thermal Spray Techniques Using Solid Powder, Suspension, and Solution Precursor Feedstock Material
Öppna denna publikation i ny flik eller fönster >>Characterization of Thermal Barrier Coatings Produced by Various Thermal Spray Techniques Using Solid Powder, Suspension, and Solution Precursor Feedstock Material
2016 (Engelska)Ingår i: International Journal of Applied CeramicTechnology, ISSN 1546-542X, Vol. 13, nr 2, s. 324-332Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Use of a liquid feedstock in thermal spraying (an alternative to the conventional solid powder feedstock) is receiving an increasing level of interest due to its capability to produce the advanced submicrometer/nanostructured coatings. Suspension plasma spraying (SPS) and solution precursor plasma spraying (SPPS) are those advanced thermal spraying techniques which help to feed this liquid feedstock. These techniques have shown to produce better performance thermal barrier coatings (TBCs) than conventional thermal spraying. In this work, a comparative study was performed between SPS- and SPPS-sprayed TBCs which then were also compared with the conventional atmospheric plasma-sprayed (APS) TBCs. Experimental characterization included SEM, porosity analysis using weight difference by water infiltration, thermal conductivity measurements using laser flash analysis, and lifetime assessment using thermo-cyclic fatigue test. It was concluded that SPS coatings can produce a microstructure with columnar type features (intermediary between the columnar and vertically cracked microstructure), whereas SPPS can produce vertically cracked microstructure. It was also shown that SPS coatings with particle size in suspension (D50) <3 μm were highly porous with lower thermal conductivity than SPPS and APS coatings. Furthermore, SPS coatings have also shown a relatively better thermal cyclic fatigue lifetime than SPPS.

Ort, förlag, år, upplaga, sidor
Wiley-Blackwell, 2016
Nyckelord
Thermal spraying, coating, spray techniques
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik
Forskningsämne
Produktionsteknik; TEKNIK, Produktions- och materialteknik
Identifikatorer
urn:nbn:se:hv:diva-8636 (URN)10.1111/ijac.12472 (DOI)000372037300017 ()2-s2.0-84960358653 (Scopus ID)
Anmärkning

Article first published online:11 September 2015

Tillgänglig från: 2015-11-11 Skapad: 2015-11-11 Senast uppdaterad: 2019-05-21Bibliografiskt granskad
2. Comparative study of suspension plasma sprayed and suspension high velocity oxy-fuel sprayed YSZ thermal barrier coatings
Öppna denna publikation i ny flik eller fönster >>Comparative study of suspension plasma sprayed and suspension high velocity oxy-fuel sprayed YSZ thermal barrier coatings
Visa övriga...
2015 (Engelska)Ingår i: Surface and Coatings Technology, ISSN 0257-8972, Vol. 268, s. 70-76Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Suspension Thermal Spraying is a relatively new thermal spaying technique to produce advanced thermal barrier coatings. This technique enables the production of much different performance thermal barrier coatings than conventional thermal spraying which uses solid powder as a feedstock material. In this work a comparative study is performed on four different types of thermal barrier coatings sprayed with two different thermal spay processes, suspension high velocity oxy-fuel spraying (SHVOF) and suspension plasma spraying (SPS) using two different water-based suspensions. Tests carried out include microstructural analysis with SEM, porosity analysis using weight difference by water infiltration, thermal conductivity measurements using laser flash analysis and lifetime assessment using thermo-cyclic fatigue tests. The results showed that SPS coatings were much porous and hence showed lower thermal conductivity than SHVOF coatings produced with the same suspension. From the thermo-cycling tests it was observed that the SPS coatings showed a higher lifetime than the SHVOF ones.

Ort, förlag, år, upplaga, sidor
Elsevier, 2015
Nyckelord
Suspension plasma spraying, Thermal barrier coatings, Suspension high velocity oxy-fuel spraying, Vertical cracks, Thermal conductivity
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik
Forskningsämne
TEKNIK, Produktions- och materialteknik; Produktionsteknik
Identifikatorer
urn:nbn:se:hv:diva-7264 (URN)10.1016/j.surfcoat.2014.11.054 (DOI)000353735300012 ()2-s2.0-84926216396 (Scopus ID)
Konferens
6th Rencontres Internationales de la Projection Thermique
Tillgänglig från: 2015-01-12 Skapad: 2015-01-09 Senast uppdaterad: 2018-05-23Bibliografiskt granskad
3. Characterization of Microstructure and Thermal Properties of YSZ Coatings Obtained by Axial Suspension Plasma Spraying (ASPS)
Öppna denna publikation i ny flik eller fönster >>Characterization of Microstructure and Thermal Properties of YSZ Coatings Obtained by Axial Suspension Plasma Spraying (ASPS)
Visa övriga...
2015 (Engelska)Ingår i: Journal of thermal spray technology (Print), ISSN 1059-9630, E-ISSN 1544-1016, Vol. 24, nr 7, s. 1195-1204Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

The paper aims at demonstrating various microstructures which can be obtained using the suspension spraying technique and their respective significance in enhancing the thermal insulation property of a thermal barrier coating. Three different types of coating microstructures are discussed which were produced by the Axial Suspension Plasma Spraying. Detailed characterization of coatings was then performed. Optical and scanning electron microscopy were utilized for microstructure evaluations; x-ray diffraction for phase analysis; water impregnation, image analysis, and mercury intrusion porosimetry for porosity analysis, and laser flash analysis for thermal diffusivity measurements were used. The results showed that Axial Suspension Plasma Spraying can generate vertically cracked, porous, and feathery columnar-type microstructures. Pore size distribution was found in micron, submicron, and nanometer range. Higher overall porosity, the lower density of vertical cracks or inter-column spacing, and higher inter-pass porosity favored thermal insulation property of the coating. Significant increase in thermal diffusivity and conductivity was found at higher temperature, which is believed to be due to the pore rearrangement (sintering and pore coarsening). Thermal conductivity values for these coatings were also compared with electron beam physical vapor deposition (EBPVD) thermal barrier coatings from the literature and found to be much lower. © 2015 ASM International

Nyckelord
Coatings; Cracks; Diffusion; Diffusion barriers; Microstructure; Physical vapor deposition; Plasma jets; Plasma spraying; Pore size; Porosity; Scanning electron microscopy; Sintering; Thermal conductivity; Thermal diffusivity; Thermal insulation; Thermal spraying; X ray diffraction; Yttria stabilized zirconia, Axial injections; Columnar microstructures; Nanometer pores; Suspension plasma spraying; Vertical crack, Thermal barrier coatings
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik
Forskningsämne
TEKNIK, Produktions- och materialteknik; Produktionsteknik
Identifikatorer
urn:nbn:se:hv:diva-7886 (URN)10.1007/s11666-015-0263-x (DOI)000363038600008 ()2-s2.0-84944279460 (Scopus ID)
Tillgänglig från: 2015-08-13 Skapad: 2015-08-12 Senast uppdaterad: 2018-11-13Bibliografiskt granskad
4. Influence of Microstructure on Thermal Properties of Axial Suspension Plasma-Sprayed YSZ Thermal Barrier Coatings
Öppna denna publikation i ny flik eller fönster >>Influence of Microstructure on Thermal Properties of Axial Suspension Plasma-Sprayed YSZ Thermal Barrier Coatings
Visa övriga...
2016 (Engelska)Ingår i: Journal of thermal spray technology (Print), ISSN 1059-9630, E-ISSN 1544-1016, Vol. 25, nr 1-2, s. 202-212Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Suspension plasma spraying is a relatively new thermal spaying technique to produce advanced thermal barrier coatings (TBCs) and enables production of coatings with a variety of structures—highly dense, highly porous, segmented, or columnar. This work investigates suspension plasma-sprayed TBCs produced using axial injection with different process parameters. The influence of coating microstructure on thermal properties was of specific interest. Tests carried out included microstructural analysis, phase analysis, determination of porosity, and pore size distribution, as well as thermal diffusivity/conductivity measurements. Results showed that axial suspension plasma spraying process makes it possible to produce various columnar-type coatings under different processing conditions. Significant influence of microstructural features on thermal properties of the coatings was noted. In particular, the process parameter-dependent microstructural attributes, such as porosity, column density, and crystallite size, were shown to govern the thermal diffusivity and thermal conductivity of the coating.

Nyckelord
axial injection, columnar microstructure, porosity, suspension plasma spraying, thermal conductivity, thermal diffusivity
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik
Forskningsämne
TEKNIK, Produktions- och materialteknik; Produktionsteknik
Identifikatorer
urn:nbn:se:hv:diva-8737 (URN)10.1007/s11666-015-0355-7 (DOI)000374268000021 ()2-s2.0-84953637268 (Scopus ID)
Konferens
International Thermal Spray Conference,Long Beach, CA, MAY 11-14, 2015
Tillgänglig från: 2015-12-01 Skapad: 2015-12-01 Senast uppdaterad: 2020-02-20Bibliografiskt granskad
5. Influence of Isothermal Heat Treatment on Porosity and Crystallite Size in Axial Suspension Plasma Sprayed Thermal Barrier Coatings for Gas Turbine Applications
Öppna denna publikation i ny flik eller fönster >>Influence of Isothermal Heat Treatment on Porosity and Crystallite Size in Axial Suspension Plasma Sprayed Thermal Barrier Coatings for Gas Turbine Applications
2017 (Engelska)Ingår i: Coatings, ISSN 2079-6412, Vol. 7, nr 1, s. 1-14, artikel-id 4Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

xial suspension plasma spraying (ASPS) is an advanced thermal spraying technique, which enables the creation of specific microstructures in thermal barrier coatings (TBCs) used for gas turbine applications. However, the widely varying dimensional scale of pores, ranging from a few nanometers to a few tenths of micrometers, makes it difficult to experimentally measure and analyze porosity in SPS coatings and correlate it with thermal conductivity or other functional characteristics of the TBCs. In this work, an image analysis technique carried out at two distinct magnifications, i.e., low (500×) and high (10,000×), was adopted to analyze the wide range of porosity. Isothermal heat treatment of five different coatings was performed at 1150 °C for 200 h under a controlled atmosphere. Significant microstructural changes, such as inter-columnar spacing widening or coalescence of pores (pore coarsening), closure or densification of pores (sintering) and crystallite size growth, were noticed in all the coatings. The noted changes in thermal conductivity of the coatings following isothermal heat treatment are attributable to sintering, crystallite size growth and pore coarsening

Nyckelord
axial suspension plasma spraying; thermal barrier coatings; sintering; pore coarsening; nano-sized pores; crystallite size growth; thermal conductivity
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik
Forskningsämne
Produktionsteknik; TEKNIK, Produktions- och materialteknik
Identifikatorer
urn:nbn:se:hv:diva-10505 (URN)10.3390/coatings7010004 (DOI)000395504700004 ()
Tillgänglig från: 2017-01-09 Skapad: 2017-01-09 Senast uppdaterad: 2019-12-05Bibliografiskt granskad
6. Failure analysis of thermally cycled columnar thermal barrier coatings produced by high-velocity-air fuel and axial-suspension-plasma spraying: A design perspective
Öppna denna publikation i ny flik eller fönster >>Failure analysis of thermally cycled columnar thermal barrier coatings produced by high-velocity-air fuel and axial-suspension-plasma spraying: A design perspective
Visa övriga...
2018 (Engelska)Ingår i: Ceramics International, ISSN 0272-8842, E-ISSN 1873-3956, Vol. 44, nr 3, s. 3161-3172Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Axial-suspension-plasma spraying (ASPS) is a fairly recent thermal spray technology which enables production of ceramic top coats in TBCs, incorporating simultaneously the properties of both the conventional-plasma sprayed (highly insulating porous structures) and electron-beam-physical-vapor-deposited (strain-tolerant columnar structures) top coats. TBCs are required to insulate the hot components in a gas turbine engine against high temperature and harsh operating conditions. Periodic heating and cooling of turbine engines during operation can create severe thermal cyclic fatigue conditions which can degrade the performance of these coatings eventually leading to the failure. An in-depth experimental investigation was performed to understand the failure behavior of columnar TBCs subjected to thermal cyclic fatigue (TCF) test at 1100 C. The study revealed that the TCF performance was influenced to an extent, by the top coat microstructure, but was primarily affected by the severity of thermally grown oxide (TGO) growth at the bond coat-top coat interface. Mixed failure modes comprising crack propagation through the bond coat-TGO interface, through TGO and within the top coat were identified. Based on the analysis of the experimental results and thorough discussion a novel design of microstructure for the high TCF performance columnar TBC is proposed. © 2017 Elsevier Ltd and Techna Group S.r.l.

Nyckelord
Air; Coatings; Engines; Gas turbines; Microstructure; Plasma jets; Plasma spraying; Sprayed coatings; Structural design; Suspensions (components); Thermal spraying, Columnar structures; Experimental investigations; High velocity air fuels; Physical vapor deposited; Suspension plasma spraying; Thermal cyclic fatigue; Thermal spray technology; Thermally grown oxide, Thermal barrier coatings
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik
Forskningsämne
TEKNIK, Produktions- och materialteknik
Identifikatorer
urn:nbn:se:hv:diva-11920 (URN)10.1016/j.ceramint.2017.11.084 (DOI)000423891900070 ()2-s2.0-85034822127 (Scopus ID)
Forskningsfinansiär
Västra Götalandsregionen, RUN 612-0974-13
Tillgänglig från: 2017-12-13 Skapad: 2017-12-13 Senast uppdaterad: 2019-05-28Bibliografiskt granskad
7. Tailoring columnar microstructure of axial suspension plasma sprayed TBCs for superior thermal shock performance
Öppna denna publikation i ny flik eller fönster >>Tailoring columnar microstructure of axial suspension plasma sprayed TBCs for superior thermal shock performance
2018 (Engelska)Ingår i: Materials & design, ISSN 0264-1275, E-ISSN 1873-4197, Vol. 144, s. 192-208Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

This paper investigates the thermal shock behavior of thermal barrier coatings (TBCs) produced by axial suspension plasma spraying (ASPS). TBCs with different columnar microstructures were subjected to cyclic thermal shock testing in a burner rig. Failure analysis of these TBCs revealed a clear relationship between lifetime and porosity. However, tailoring the microstructure of these TBCs for enhanced durability is challenging due to their inherently wide pore size distribution (ranging from few nanometers up to few tens of micrometers). This study reveals that pores with different length scales play varying roles in influencing TBC durability. Fracture toughness shows a strong correlation with the lifetime of various ASPS TBCs and is found to be the prominent life determining factor. Based on the results, an understanding-based design philosophy for tailoring of the columnar microstructure of ASPS TBCs for enhanced durability under cyclic thermal shock loading is proposed. © 2018 The Authors

Nyckelord
Coatings; Durability; Fracture toughness; Microstructure; Plasma jets; Plasma spraying; Pore size; Shock testing; Size distribution; Thermal shock; Thermal spraying, Columnar microstructures; Cyclic thermal shocks; Design philosophy; Different length scale; Strong correlation; Superior performance; Suspension plasma spraying; Thermal barrier coating (TBCs), Thermal barrier coatings
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik
Forskningsämne
TEKNIK, Produktions- och materialteknik
Identifikatorer
urn:nbn:se:hv:diva-12192 (URN)10.1016/j.matdes.2018.02.011 (DOI)000427609400017 ()2-s2.0-85042178578 (Scopus ID)
Forskningsfinansiär
Västra Götalandsregionen, RUN 612-0974-13KK-stiftelsen, DNr 20140130
Tillgänglig från: 2018-03-05 Skapad: 2018-03-05 Senast uppdaterad: 2019-05-28Bibliografiskt granskad

Open Access i DiVA

fulltext(20294 kB)2500 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 20294 kBChecksumma SHA-512
05d3a5eeb7fd1ecf023fbce6f02e12c681a735ec1e145844ee323b791bcd095dcd3ddf60145b1c8cc1c8f5bcb24f5b6d7249d173716c993a9181da27d960ad31
Typ fulltextMimetyp application/pdf
fulltext(51 kB)125 nedladdningar
Filinformation
Filnamn FULLTEXT02.pdfFilstorlek 51 kBChecksumma SHA-512
211d67818b8719da8eddc93c3f7aa705e63c525b311d140dd1446b77b18f264e3ca141418e16e04e3b95398888b3a66c2245750de5cae56bbaa9ff65c0fd1b91
Typ fulltextMimetyp application/pdf

Person

Ganvir, Ashish

Sök vidare i DiVA

Av författaren/redaktören
Ganvir, Ashish
Av organisationen
Avdelningen för avverkande och additativa tillverkningsprocesser (AAT)
Bearbetnings-, yt- och fogningsteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 2626 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

isbn
urn-nbn

Altmetricpoäng

isbn
urn-nbn
Totalt: 3139 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf