Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Failure analysis of suspension plasma sprayed thermal barrier coatings
Högskolan Väst, Institutionen för ingenjörsvetenskap, Forskningsmiljön produktionsteknik(PTW).
2017 (Engelska)Självständigt arbete på avancerad nivå (magisterexamen), 10 poäng / 15 hpStudentuppsats (Examensarbete)Alternativ titel
Intern sensormätning för att minska behovet av koordinat mätmaskiner (Svenska)
Abstract [en]

Thermal barrier coatings (TBC) are proven to protect the hot section of components operated under elevated temperature. Suspension Plasma Spray (SPS) is an emerging manufacturing process that is used to produce TBCsI, It has the ability to deposit a thinner TBC that has finer microstructure than coatings deposited using traditional Atmospheric Plasma Spray (APS). The coating spray parameters have a significant role in developing the coating properties and thereby the coatings failure. In this thesis work, the parameters such as the spray distance, the feed rate, and the surface velocity were varied to deposit six sets of TBC samples. The as-sprayed samples were analysed and next tested at different temperatures (1000°C, 1050°C and 1100°C) making thermal cyclic fatigue test (TCF) and thermal shock test also known as Burner Rig Test (BRT). These investigations aimed at trying to find an explanation for the effect of each varied process parameter on the deposited TBC. However the cases at 1100°C were not reliable enough to conclude.

It was found that most porous coating was produced in Run 1. The porosity decreased gradually from Run 1 to the last run (Run 6) by changing the spray parameters. The failure in all cases was mainly due to the Thermally Grown Oxide (TGO) which causes cracking near the topcoat-bond coat interface. According to many cross sectional and top surface morphology SEM images taken during this work, the sintering of TBCs during thermal cycling also played a significant role in the top coat failure.

Ort, förlag, år, upplaga, sidor
2017. , s. 29
Nyckelord [en]
Failure analysis, Suspension plasma sprayed, Thermal barrier coating
Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi
Identifikatorer
URN: urn:nbn:se:hv:diva-12142Lokalt ID: EXP800OAI: oai:DiVA.org:hv-12142DiVA, id: diva2:1185016
Utbildningsprogram
Produktionsteknik
Handledare
Examinatorer
Tillgänglig från: 2018-02-27 Skapad: 2018-02-23 Senast uppdaterad: 2018-02-27Bibliografiskt granskad

Open Access i DiVA

fulltext(3152 kB)165 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 3152 kBChecksumma SHA-512
dbb938478769b3d8cb2f864a3dfda970fa5a21669f937fc33a44035f53b75e5bb742eb6628b827d2bc2c7491bf82a9c365415f22503e125387f618d8fadb5175
Typ fulltextMimetyp application/pdf

Av organisationen
Forskningsmiljön produktionsteknik(PTW)
Produktionsteknik, arbetsvetenskap och ergonomi

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 165 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

urn-nbn

Altmetricpoäng

urn-nbn
Totalt: 193 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf