Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Internal sensor measurement to reduce the need of coordinate measuring machines
Högskolan Väst, Institutionen för ingenjörsvetenskap, Avdelningen för avverkande och additativa tillverkningsprocesser (AAT).
2017 (Engelska)Självständigt arbete på avancerad nivå (magisterexamen), 10 poäng / 15 hpStudentuppsats (Examensarbete)
Abstract [en]

This thesis presents the approach of determining the machining  errors on a five axis CNC machine using sensors already fitted in the machine to extract valuable data up on process called CITE(CNC Integrity Tracing Equipment) system and measuring the machined workpiece geometry using CMM(Coordinate measurement machine). CITE measurement system is the data acquisition hardware and software system developed by University West for collecting position information from encoders of a machine tool. The collected information could then be used to assess the quality and adjustment of a machine tool, CNC programs and the CNC control parameters. The aim of this study is to examine the roundness and concentricity detection capacity of the CITE system by conducting different milling methods and a turning process. In an example cutting of a workpiece, the CITE measurement system was used for recording the machining process. After that, radial error, centre point deviation and circle roundness errors, analysed using MATLAB based on collected CNC tool movement data. CMM measurement used to verify the results obtained from the CITE measurement system. The investigation conducted on the small circles shows that the CITE measurement system have capability of identifying radial errors in different method of millings (slot, up and down). Centre point deviation and roundness errors measured by the CITE system doesn`t show significant differences between milling methods as seen on CMM measurement.

Ort, förlag, år, upplaga, sidor
2017. , s. 24
Nyckelord [en]
Milling processes, Measuring systems, Radial error, Roundness
Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi
Identifikatorer
URN: urn:nbn:se:hv:diva-11679Lokalt ID: EXP800OAI: oai:DiVA.org:hv-11679DiVA, id: diva2:1145481
Ämne / kurs
Maskinteknik
Utbildningsprogram
Produktionsteknik
Handledare
Examinatorer
Tillgänglig från: 2017-10-06 Skapad: 2017-09-29 Senast uppdaterad: 2017-10-06Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Av organisationen
Avdelningen för avverkande och additativa tillverkningsprocesser (AAT)
Produktionsteknik, arbetsvetenskap och ergonomi

Sök vidare utanför DiVA

GoogleGoogle Scholar

urn-nbn

Altmetricpoäng

urn-nbn
Totalt: 796 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf