Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Effect of microstructure on the impact toughness of a cold work tool steel
Högskolan Väst, Institutionen för ingenjörsvetenskap, Forskningsmiljön produktionsteknik(PTW). Dept. of Material Technology, Uddeholms AB, Hagfors, Sweden. (PTW)ORCID-id: 0000-0001-6300-5923
2014 (engelsk)Inngår i: Sonderbände der Praktischen Metallographie: Proceedings of 14th International Metallography Conference 2014, Montanauniversitet, Leoben, Österrike, 17-19 sept 2014, Riederer , 2014, Vol. 46, s. 307-312Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

The effect of different combination of austenitization temperatures and tempering treatments on microstructure and impact toughness has been studied for the cold work tool steel -Uddeholm Caldie. This is a chromium, vanadium and molybdenum alloyed tool steel with approximately 0.7 wt.% C. It is used as a tool in industrial applications such as cutting, punching, shearing, forming, drawing and extrusion. A combination of high hardness and adequate toughness is required to withstand the common tool failure modesof chipping and cracking.Retained austenite content, hardness and prior austenite grain size were measured. The impact toughness was determined for un-notched impact test specimens. The microstructure and fracture surfaces of impact tested samples were characterized both macroscopically and microscopically. Scanning Electron Microscopy, Light Optical Microscopy and X-Ray Diffraction measurements were used. Higher austenitization temperatures resulted in larger amounts of retained austenite and higher hardness. A higher austenitization temperature also caused coarsening of austenite grains and resulted in reduced toughness. Impact specimens austenitized and tempered at lower temperatures were found to have better toughness than those at high austenitization and tempering temperatures.

sted, utgiver, år, opplag, sider
Riederer , 2014. Vol. 46, s. 307-312
Emneord [en]
Impact toughness, hardness, Temperature
HSV kategori
Forskningsprogram
Produktionsteknik; TEKNIK, Produktions- och materialteknik
Identifikatorer
URN: urn:nbn:se:hv:diva-9279ISBN: 978-3-88355-403-7 (tryckt)OAI: oai:DiVA.org:hv-9279DiVA, id: diva2:916427
Konferanse
14th International Metallography Conference 2014, Montanauniversitet, Leoben, Österrike, 17-19 sept 2014
Tilgjengelig fra: 2016-04-02 Laget: 2016-04-02 Sist oppdatert: 2019-11-29bibliografisk kontrollert

Open Access i DiVA

Fulltekst mangler i DiVA

Person

Rehan, Arbab

Søk i DiVA

Av forfatter/redaktør
Rehan, Arbab
Av organisasjonen

Søk utenfor DiVA

GoogleGoogle Scholar

isbn
urn-nbn

Altmetric

isbn
urn-nbn
Totalt: 250 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf