Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Evaluation of microstructural and dry sliding wear characteristics of pulsed Nd:YAG laser surface melted Al-Si alloys
2004 (engelsk)Inngår i: Proceedings of the International Conference on Advances in Surface Treatment: Research and Applications, ASTRA, 2004, s. 568-574Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

Aluminium-Silicon alloys are being increasingly considered for manufacture of wear prone components in automobile and aircraft industries owing to their light weight, superior corrosion resistance and high thermal conductivity, besides their amenability to processing methods such as casting. However, poor tribological characteristics have hampered industrial adoption of the above class of alloys. In principle, the tribological properties of these alloys can be improved by refining the microstructure by laser remelting techniques. Recently, Nd:YAG lasers have been used for processing of reflective materials such as Aluminium, as these lasers have better absorptivity compared to the CO2 lasers. The present study investigates the microstructural characteristics and improvements in sliding wear resistance that can result from surface melting of Al-Si alloys using a 400 W pursed Nd:YAG laser. Three different Al-Si alloys with varying Si content 5%, 12.5% and 20% have been investigated in the present study. The microstructures of the transverse cross sections of the treated samples were examined in detail and X-ray diffraction (XRD) studies carried out to ascertain changes in phase constitution. The surface melting and subsequent rapid solidification was found to cause considerable refinement of the microstructure, which in turn increased the hardness in the treated layer compared with that of bulk. The effect of laser beam scan speed on microhardness of the treated samples was evaluated. Dry sliding wear tests were conducted on treated and untreated samples of Al-12Si using a pin-on disc tribometer. The volume wear rates determined in case of the treated and untreated samples are discussed in the paper. The results have also been correlated with the morphological and microstructural characteristics noted in the laser treated specimens. Copyright © 2004 by Society for Advancement of Heat Treatment & Surface Engineering (SAHTSE).

sted, utgiver, år, opplag, sider
2004. s. 568-574
Identifikatorer
URN: urn:nbn:se:hv:diva-8536OAI: oai:DiVA.org:hv-8536DiVA, id: diva2:860175
Konferanse
International Conference on Advances in Surface Treatment: Research and Applications, ASTRA; Hyderabad; India; 3 November 2003 through 6 November 2003; Code 67247
Tilgjengelig fra: 2015-10-10 Laget: 2015-10-10 Sist oppdatert: 2015-10-10bibliografisk kontrollert

Open Access i DiVA

Fulltekst mangler i DiVA

Person

Joshi, S. V.

Søk i DiVA

Av forfatter/redaktør
Joshi, S. V.

Søk utenfor DiVA

GoogleGoogle Scholar

urn-nbn

Altmetric

urn-nbn
Totalt: 80 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf