In future generation aviation, light weight, and thermally stable SiC/SiC ceramic matrix composites (CMCs) are considered the most promising structural materials to replace traditionally used Ni-based superalloys. However, in the presence of steam (a common combustion reaction product) and corrosive species (from ingestion of debris along with the intake air during take-off and landing), accelerated degradation of CMCs compromising its structural integrity is inevitable. Environmental Barrier Coatings (EBCs) are protective ceramic coatings consisting of rare earth (RE) silicates as a topcoat with silicon as a bond coat, and are widely used on CMCs, to impede their surface recession.

Thermal spray techniques are commonly employed to deposit EBCs, with highly crystalline, dense, and crack free coatings being desired for robust performance. In general, the high particle velocity and efficient energy transfer in axial feeding systems can result in coatings with higher density, reduced oxide content, and improved mechanical properties. In the present study, axial plasma sprayed ytterbium disilicate (YbDS) coatings deposited on silicon carbide (SiC) substrates using varying plasma spray parameters have been comprehensively characterized. Microstructure, porosity, and hardness have been studied for YbDS coatings deposited by varying nozzle diameter, carrier gas flow rate and stand of distance (SOD) during plasma spraying. Erosion and thermal cyclic fatigue performance of these coatings has also been investigated.