Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Influence of laser exposure time and point distance on 75-μm-thick layer of selective laser melted Alloy 718
Högskolan Väst, Institutionen för ingenjörsvetenskap, Avdelningen för avverkande och additativa tillverkningsprocesser (AAT). (PTW)ORCID-id: 0000-0001-6610-1486
Högskolan Väst, Institutionen för ingenjörsvetenskap, Avdelningen för svetsteknologi (SV). (PTW)ORCID-id: 0000-0002-4598-4790
Högskolan Väst, Institutionen för ingenjörsvetenskap, Avdelningen för svetsteknologi (SV). (PTW)ORCID-id: 0000-0001-9065-0741
Högskolan Väst, Institutionen för ingenjörsvetenskap, Avdelningen för svetsteknologi (SV). (PTW)ORCID-id: 0000-0003-2560-0531
2018 (engelsk)Inngår i: The International Journal of Advanced Manufacturing Technology, ISSN 0268-3768, E-ISSN 1433-3015, Vol. 94, nr 5-8, s. 2199-2207Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

A systematic matrix with 25 samples, using five different point distances and five laser exposure times, depositing 75-μm-thick layers of Alloy 718 has been studied. The work has concentrated on defects formed, hardness of the deposits, and the microstructure. Relatively large amount of defects, both lack of fusion and porosity, was found in several of the specimens in the deposits. The defects were never possible to fully eliminate, but a significant decrease, mainly in the lack of fusion, was seen with increasing laser exposure time. The gas porosity on the other hand was not affected to any larger degree, except for the lowest laser energy input, where a slight increase in porosity was seen. A small increase in hardness was noted with increasing laser energy input. The width of the deposited beads increased with increasing laser energy, while the depth of deposits was more or less constant. However, for the lowest combination of point distance and laser exposure time, quite deep and narrow beads were formed. A comparison was made with deposition of 50-μm-thick layers, with quite similar laser energy input, but with some variation in detailed deposition parameters. It was found that the 75-μm-thick layers contained less lack of fusion, particularly for small point distances. The amount of porosity was also less, but that did not vary with deposition parameters.© 2017 The Author(s)

sted, utgiver, år, opplag, sider
2018. Vol. 94, nr 5-8, s. 2199-2207
Emneord [en]
3D printers; Defects; Deposition; Deposits; Hardness; Microstructure, Alloy 718; Deposition Parameters; Large amounts; Laser energies; Laser exposure; Point distances; Selective laser melting; Small points, Porosity
HSV kategori
Forskningsprogram
Produktionsteknik; TEKNIK, Produktions- och materialteknik
Identifikatorer
URN: urn:nbn:se:hv:diva-11886DOI: 10.1007/s00170-017-1019-1ISI: 000422886200055Scopus ID: 2-s2.0-85028818109OAI: oai:DiVA.org:hv-11886DiVA, id: diva2:1163015
Forskningsfinansiär
VinnovaSwedish National Space Board
Merknad

First Online: 06 September 2017

Tilgjengelig fra: 2017-12-05 Laget: 2017-12-05 Sist oppdatert: 2019-05-28bibliografisk kontrollert

Open Access i DiVA

fulltext(1738 kB)929 nedlastinger
Filinformasjon
Fil FULLTEXT01.pdfFilstørrelse 1738 kBChecksum SHA-512
3a9101b8851c960da92864b74008f31b728cc908e582f6445370a1823884663655d5fd493a96521e90cc7f1e4e791b299f835443a0e97e48e643e15c13c9476c
Type fulltextMimetype application/pdf

Andre lenker

Forlagets fulltekstScopus

Person

Karimi Neghlani, PariaRaza, TahiraAndersson, JoelSvensson, Lars-Erik

Søk i DiVA

Av forfatter/redaktør
Karimi Neghlani, PariaRaza, TahiraAndersson, JoelSvensson, Lars-Erik
Av organisasjonen
I samme tidsskrift
The International Journal of Advanced Manufacturing Technology

Søk utenfor DiVA

GoogleGoogle Scholar
Totalt: 929 nedlastinger
Antall nedlastinger er summen av alle nedlastinger av alle fulltekster. Det kan for eksempel være tidligere versjoner som er ikke lenger tilgjengelige

doi
urn-nbn

Altmetric

doi
urn-nbn
Totalt: 362 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf