Change search
Link to record
Permanent link

Direct link
Publications (7 of 7) Show all publications
Isoaho, J., Dordlofva, C., Segerstark, A., Harlin, P. & Pederson, R. (2023). Applications of additive manufacturing: Selected case studies and future prospects (1ed.). In: Pederson, Robert, Andersson, Joel & Joshi, Shrikant V. (Ed.), Additive Manufacturing of High-Performance metallic Materials: (pp. 676-716). Elsevier
Open this publication in new window or tab >>Applications of additive manufacturing: Selected case studies and future prospects
Show others...
2023 (English)In: Additive Manufacturing of High-Performance metallic Materials / [ed] Pederson, Robert, Andersson, Joel & Joshi, Shrikant V., Elsevier, 2023, 1, p. 676-716Chapter in book (Refereed)
Abstract [en]

From an industrial standpoint, cost is of one of the most important drivers for utilizing new technologies such as additive manufacturing (AM). Other important drivers for why AM can be an advantageous technology for component manufacturing is decreased manufacturing lead time, rapid demonstration capability, freedom of design/geometry, advancing technology development, and not least sustainability in terms of both material utilization and improved part/system performance. In this chapter, six selected “case studies” are compiled, in which AM techniques have been used to manufacture components for actual applications. In some case studies, a comparison between the additive manufacturing route and the corresponding conventional manufacturing route is also included.

Place, publisher, year, edition, pages
Elsevier, 2023 Edition: 1
Keywords
Cost, Component manufacturing, Demonstrator, Design freedom, Manufacturing lead time, Sustainability, Superalloys, Technology development, Titanium alloys
National Category
Manufacturing, Surface and Joining Technology
Research subject
Production Technology
Identifiers
urn:nbn:se:hv:diva-21093 (URN)9780323918855 (ISBN)9780323913829 (ISBN)
Available from: 2023-12-19 Created: 2023-12-19 Last updated: 2024-01-03Bibliographically approved
Swaminathan, K., Olsson, J., Raza, T., Harlin, P. & Andersson, J. (2023). Characterization of Laser Powder Bed Fusion of Nickel-Based Superalloy Haynes 282. In: Eric A. Ott, Joel Andersson, Chantal Sudbrack, Zhongan Bi, Kevin Bockenstedt, Ian Dempster, Michael Fahrmann, Paul Jablonski, Michael Kirka, Xingbo Liu, Daisuke Nagahama, Tim Smith, Martin Stockinger, Andrew Wessman (Ed.), Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives: . Paper presented at TMS Annual Meeting & Exhibition 2023 (pp. 553-570). Springer
Open this publication in new window or tab >>Characterization of Laser Powder Bed Fusion of Nickel-Based Superalloy Haynes 282
Show others...
2023 (English)In: Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives / [ed] Eric A. Ott, Joel Andersson, Chantal Sudbrack, Zhongan Bi, Kevin Bockenstedt, Ian Dempster, Michael Fahrmann, Paul Jablonski, Michael Kirka, Xingbo Liu, Daisuke Nagahama, Tim Smith, Martin Stockinger, Andrew Wessman, Springer, 2023, p. 553-570Conference paper, Oral presentation with published abstract (Refereed)
Abstract [en]

Nickel-based superalloy Haynes 282 specimens were manufactured using the Laser Powder Bed Fusion process with a powder layer thickness of 60 and 90 microns to study the effect of laser power, laser scan speed, and hatch distance on the melt pool dimensions and porosity. The melt pool dimensions and porosity were measured at the center of the cubes parallel to the build direction. Variation of melt pool depth and overlap exist within the same sample signifying the scatter present in the process. Laser scan speed was found to be the most significant parameter for porosity and hatch distance was found to be the most significant parameter affecting the average melt pool overlap depth in the cubes built with 60 microns layer thickness. Interaction of speed and hatch distance was found to be the most significant parameter for porosity and Laser scan speed was the most significant parameter for average melt pool overlap depth in cubes built with 90 microns layer thickness. Comparison of measured responses with individual parameters provides partial trends of melt pool dimensions and porosity. As the heat input is captured better in line energy and area energy density, a better trend of the melt pool dimensions data and marginal trend of porosity in comparison with energy densities is discussed. The ratio of maximum length to minimum length of defects such as porosity and lack of fusion is measured to determine the shape of the defects and averaged to provide insight into the dominant shape of defect for a given set of parameters.

Place, publisher, year, edition, pages
Springer, 2023
Series
The Minerals, Metals & Materials Series (MMMS), ISSN 2367-1181, E-ISSN 2367-1696 ; 4
Keywords
Haynes 282, Laser powder bed fusion, Melt pool dimensions, High layer thickness, Process parameter study
National Category
Manufacturing, Surface and Joining Technology
Research subject
Production Technology
Identifiers
urn:nbn:se:hv:diva-20175 (URN)10.1007/978-3-031-27447-3_35 (DOI)2-s2.0-85161408360 (Scopus ID)978-3-031-27446-6 (ISBN)978-3-031-27447-3 (ISBN)
Conference
TMS Annual Meeting & Exhibition 2023
Available from: 2023-06-27 Created: 2023-06-27 Last updated: 2024-04-23Bibliographically approved
Squillaci, L., Neikter, M., Hansson, T., Harlin, P., Niklasson, F. & Pederson, R. (2023). Extending powder particle size distribution of laser powder bed fusion Ti-6Al-4V: investigation of single tracks and multilayer experiments. In: : . Paper presented at 15th World Titanium Conference, June 2023, Edinburgh, United Kingdom.
Open this publication in new window or tab >>Extending powder particle size distribution of laser powder bed fusion Ti-6Al-4V: investigation of single tracks and multilayer experiments
Show others...
2023 (English)Conference paper, Oral presentation with published abstract (Other academic)
Abstract [en]

This paper explores the effects of varying process parameters (i.e., laser power, laser scanning speed, hatch distance) on the characteristics of single tracks, triple tracks and cubes, in order to provide answers to Research Question 1. A full factorial DoE approach was adopted to produce the experiments. Data was extracted from different sources to find correlations between tracks and multilayer geometries. A digital microscope was used to obtain height profiles, whilst polished/etched cross sections cut parallel to the build direction were imaged using a LOM to obtain measurements of track height, width, melt pool depth, subsurface porosity and residual defect content in cubes. Track height was found to exceed the recoated value of 70μm for both single and triple tracks. The width of single tracks showed a clear upward trend when displayed against VED, showing a lateral expansion as energy input increased. It was also revealed that single tracks expand laterally as they grow above the substrate, indicating swelling. The melt pool depth showed a steady upward trend when plotted against LED, though less systematic than track width. A martensitic microstructure was detected, with hierarchical α’ needles growing at prescribed crystallographic directions within vertical prior-β grains. A large portion of spatter particles and unmelted powder granules were detected on the substrate and tracks, with many accumulating on the side of the tracks forming a denudation zone.

Keywords
extendign powder, laser powder
National Category
Manufacturing, Surface and Joining Technology
Research subject
Production Technology
Identifiers
urn:nbn:se:hv:diva-20988 (URN)
Conference
15th World Titanium Conference, June 2023, Edinburgh, United Kingdom
Note

This paper is under review och will be published in Proceedings.

Available from: 2023-11-24 Created: 2023-11-24 Last updated: 2024-01-08Bibliographically approved
Harlin, P. (2023). Metal powders for additive manufacturing of superalloys and titanium alloys (1ed.). In: Pederson, Robert, Andersson, Joel & Joshi, Shrikant V. (Ed.), Additive Manufacturing of High-Performance metallic Materials: (pp. 41-82). Elsevier
Open this publication in new window or tab >>Metal powders for additive manufacturing of superalloys and titanium alloys
2023 (English)In: Additive Manufacturing of High-Performance metallic Materials / [ed] Pederson, Robert, Andersson, Joel & Joshi, Shrikant V., Elsevier, 2023, 1, p. 41-82Chapter in book (Refereed)
Abstract [en]

This chapter explores the fundamentals of powders for metaladditive manufacturing and includes descriptions of powdermanufacturing processes, powder properties, and how theproperties affect the powder performance in metal additivemanufacturing processes. The powder manufacturing processeswill be restricted to processes used for titanium alloys andsuperalloys. Related to the powder properties, the reader will beintroduced to both characteristics of discrete particles and as avolume of a larger amount of powder particles and some of themost used standards.

Place, publisher, year, edition, pages
Elsevier, 2023 Edition: 1
Keywords
Atomization; Metal powder; Morphology; Sizing; Classification; Additive manufacturing; Titanium; Superalloys
National Category
Manufacturing, Surface and Joining Technology
Research subject
Production Technology
Identifiers
urn:nbn:se:hv:diva-21094 (URN)9780323918855 (ISBN)9780323913829 (ISBN)
Available from: 2023-12-19 Created: 2023-12-19 Last updated: 2024-01-10Bibliographically approved
Adegoke, O., Kumara, C., Thuvander, M., Deirmina, F., Andersson, J., Brodin, H., . . . Pederson, R. (2023). Scanning electron microscopy and atom probe tomography characterization of laser powder bed fusion precipitation strengthening nickel-based superalloy. Micron, 171, Article ID 103472.
Open this publication in new window or tab >>Scanning electron microscopy and atom probe tomography characterization of laser powder bed fusion precipitation strengthening nickel-based superalloy
Show others...
2023 (English)In: Micron, ISSN 0968-4328, E-ISSN 1878-4291, Vol. 171, article id 103472Article in journal (Refereed) Epub ahead of print
Abstract [en]

Atom probe tomography (APT) was utilized to supplement scanning electron microscopy (SEM) characterizationof a precipitation strengthening nickel-based superalloy, Alloy 247LC, processed by laser powder bed fusion (LPBF). It was observed that the material in the as-built condition had a relatively high strength. Using both SEMand APT, it was concluded that the high strength was not attributed to the typical precipitation strengtheningeffect of γ’. In the absence of γ’ it could be reasonably inferred that the numerous black dots observed in thecells/grains with SEM were dislocations and as such should be contributing significantly to the strengthening.Thus, the current investigation demonstrated that relatively high strengthening can be attained in L-PBF even inthe absence of precipitated γ’. Even though γ’ was not precipitated, the APT analysis displayed a nanometer scalepartitioning of Cr that could be contributing to the strengthening. After heat-treatment, γ’ was precipitated and itdemonstrated the expected high strengthening behavior. Al, Ta and Ti partitioned to γ’. The strong partitioningof Ta in γ’ is indicative that the element, together with Al and Ti, was contributing to the strain-age crackingoccurring during heat-treatment. Cr, Mo and Co partitioned to the matrix γ phase. Hf, Ta, Ti and W were found inthe carbides corroborating previous reports that they are MC. 

Keywords
CM247LC, Superalloy, Additive manufacturing, atom probe tomography, Scanning electron microscopy, gamma prime
National Category
Manufacturing, Surface and Joining Technology
Research subject
Production Technology
Identifiers
urn:nbn:se:hv:diva-20014 (URN)10.1016/j.micron.2023.103472 (DOI)000999885100001 ()37146362 (PubMedID)2-s2.0-85154065448 (Scopus ID)
Available from: 2023-06-01 Created: 2023-06-01 Last updated: 2024-01-15Bibliographically approved
Adegoke, O., Andersson, J., Brodin, H., Pederson, R. & Harlin, P. (2022). Influence of laser powder bed fusion process parameters on the microstructure and cracking susceptibility of nickel-based superalloy Alloy 247LC. Results in Materials, 13, Article ID 100256.
Open this publication in new window or tab >>Influence of laser powder bed fusion process parameters on the microstructure and cracking susceptibility of nickel-based superalloy Alloy 247LC
Show others...
2022 (English)In: Results in Materials, ISSN 2590-048X, Vol. 13, article id 100256Article in journal (Refereed) Published
Abstract [en]

Microstructures of material conditions of nickel-based superalloy Alloy 247LC fabricated using laser powder bed fusion (L-PBF) were investigated. Experiments designed in a prior study revealed the L-PBF process parameters for which the material conditions displayed a reduced susceptibility to cracking. Certain process parameters produced material conditions with an increased susceptibility to cracking. In this study, the material conditions were investigated in detail to reveal their microstructure and to determine the cause of cracking. The reason for the transition between a reduced to an increased susceptibility to cracking was examined. The results revealed solidification cracking occurred at high-angle grain boundaries. Solidification cracking may have been promoted at high-angle grain boundaries because of the undercooling contribution of the grain boundary energy. Furthermore, Si segregation was observed in the cracks. Thus, the presence of Si most likely promoted solidification cracking. It was observed that a high crack density, which occurred in the high energy density material condition, was associated with a large average grain size. The fact that certain combination of process parameters produced microstructures with a low susceptibility to cracking, indicates that reliable Alloy 247LC material may be printed using L-PBF by employing improved process parameters. © 2022

Place, publisher, year, edition, pages
Elsevier, 2022
Keywords
Alloy 247LCNickel-based superalloySolidification crackingPoreLaser powder bed fusionProcess parameters
National Category
Manufacturing, Surface and Joining Technology
Research subject
Production Technology
Identifiers
urn:nbn:se:hv:diva-18291 (URN)10.1016/j.rinma.2022.100256 (DOI)2-s2.0-85126646905 (Scopus ID)
Funder
Knowledge Foundation, 20160281
Note

This work was supported by the KK Foundation [grant number: 20160281] through SUMAN Next and PODFAM projects.

Available from: 2022-04-19 Created: 2022-04-19 Last updated: 2022-04-19
Adegoke, O., Polisetti, S. R., Xu, J., Andersson, J., Brodin, H., Pederson, R. & Harlin, P. (2022). Influence of laser powder bed fusion process parameters on the microstructure of solution heat-treated nickel-based superalloy Alloy 247LC. Materials Characterization, 183, Article ID 111612.
Open this publication in new window or tab >>Influence of laser powder bed fusion process parameters on the microstructure of solution heat-treated nickel-based superalloy Alloy 247LC
Show others...
2022 (English)In: Materials Characterization, ISSN 1044-5803, E-ISSN 1873-4189, Vol. 183, article id 111612Article in journal (Refereed) Published
Abstract [en]

In this study, Alloy 247LC samples were built with different laser powder bed fusion (L-PBF) process parameters. The samples were then subjected to solution heat treatment at 1260 °C for 2 h. The grain size of all the samples increased significantly after the heat treatment. The relationship between the process parameters and grain size of the samples was investigated by performing a design of experiment analysis. The results indicated that the laser power was the most significant process parameter that influenced the grain height and aspect ratio. The laser power also significantly influenced the grain width. The as-built and as-built + heat-treated samples with high, medium, and low energy densities were characterized using a field emission gun scanning electron microscope equipped with an electron backscatter diffraction detector. The micrographs revealed that the cells present in the as-built samples disappeared after the heat treatment. Isolated cases of twinning were observed in the grains of the as-built + heat-treated samples. The disappearance of cells, increase in the grain size, and appearance of twins suggested that recrystallization occurred in the alloy after the heat treatment. The occurrence of recrystallization was confirmed by analyzing the grain orientation spread of the alloy, which was lower and more predominantly <1° in the as-built + heat-treated conditions than in the as-built conditions. The microhardness of the as-built + heat-treated samples were high which was plausible because γ’ precipitates were observed in the samples. However, the L-PBF process parameters had a very low correlation with the microhardness of the as-built + heat-treated samples.

Place, publisher, year, edition, pages
Elsevier, 2022
Keywords
Mechanical Engineering, Mechanics of Materials, Condensed Matter Physics, General Materials Science
National Category
Manufacturing, Surface and Joining Technology
Research subject
Production Technology
Identifiers
urn:nbn:se:hv:diva-17873 (URN)10.1016/j.matchar.2021.111612 (DOI)000729283300002 ()2-s2.0-85120334650 (Scopus ID)
Available from: 2021-11-30 Created: 2021-11-30 Last updated: 2022-04-04Bibliographically approved
Organisations
Identifiers
ORCID iD: ORCID iD iconorcid.org/0000-0002-2185-1774

Search in DiVA

Show all publications