Endre søk
Link to record
Permanent link

Direct link
BETA
Publikasjoner (10 av 10) Visa alla publikasjoner
Hagqvist, P., Christiansson, A.-K. & Heralic, A. (2015). Automation of a laser welding system for additive manufacturing. In: Kazuhiro Saitou, Univ. of Michigan (Ed.), Proceedings of the 2015 IEEE International Conference on Automation Science and Engineering: . Paper presented at 11th IEEE International Conference on Automation Science and Engineering, CASE 2015; Elite Park Avenue HotelGothenburg; Sweden; 24 August 2015 through 28 August 2015 (pp. 900-905). IEEE
Åpne denne publikasjonen i ny fane eller vindu >>Automation of a laser welding system for additive manufacturing
2015 (engelsk)Inngår i: Proceedings of the 2015 IEEE International Conference on Automation Science and Engineering / [ed] Kazuhiro Saitou, Univ. of Michigan, IEEE, 2015, s. 900-905Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

This paper presents the benefits and challenges ofusing a standard robotised laser welding cell for additive manufacturing(AM). Additive manufacturing, sometimes denoted3D-printing or rapid prototyping, has lately met strong interestin several areas of society, and a variety of technologies andmaterials have been in focus. The current paper summarisesautomation efforts for AM of advanced aero engine componentsusing high power laser with welding optics as power source formelting metal wire and using an industrial robot for obtaininga 3-dimensional feature shape. The challenges are related to theprocess itself encountering high and repeated temperatures withmelting and solidification of the metal as the main players. Themajor research solutions discussed in this paper are relatedto automation issues for obtaining a stable process and tohave control of the temperatures and temperature changes thatthe metals encounter during the process. The solutions aresuccessfully implemented in an industrial laser welding cell.

sted, utgiver, år, opplag, sider
IEEE, 2015
Emneord
Additive manufacturing, laser welding
HSV kategori
Forskningsprogram
TEKNIK, Produktions- och materialteknik; Produktionsteknik
Identifikatorer
urn:nbn:se:hv:diva-8015 (URN)10.1109/CoASE.2015.7294213 (DOI)2-s2.0-84952778708 (Scopus ID)978-1-4673-8182-6 (ISBN)
Konferanse
11th IEEE International Conference on Automation Science and Engineering, CASE 2015; Elite Park Avenue HotelGothenburg; Sweden; 24 August 2015 through 28 August 2015
Merknad

Article number 7294213

Tilgjengelig fra: 2015-08-31 Laget: 2015-08-31 Sist oppdatert: 2018-08-12bibliografisk kontrollert
Hagqvist, P. (2015). Non-intrusive instrumentation and estimation: Applications for control of an additive manufacturing process. (Doctoral dissertation). Göteborg: Chalmers University of Technology,
Åpne denne publikasjonen i ny fane eller vindu >>Non-intrusive instrumentation and estimation: Applications for control of an additive manufacturing process
2015 (engelsk)Doktoravhandling, med artikler (Annet vitenskapelig)
Abstract [en]

For integration of additive manufacturing into industrial production, there is a need for capable yet robust automation solutions. Such solutions are to ensure consistent process outputs, both with regard to deposit geometry and material properties. In this thesis, instrumentation and control solutions have been investigated for the laser metal wire deposition additive manufacturing process. This particular process is promising with regard to e.g. high deposition rates and negligible material waste. However, due to its inherent dynamics, it requires automatic control in order to prove competitive. A large number of process parameters affect the resulting quality of the deposit. Successful control of these parameters is crucial for turning laser metal wire deposition into an industrially tractable process. This requires relevant and reliable process information such as the temperature of the deposit and the positioning of the tool relative to the workpiece. Due to the particular requirements of instrumenting the process, only non-intrusive measurement methods are viable. In this thesis, such measurement solutions are presented that advance automatic control of the laser metal wire deposition. In response to the need for accurate temperature measurements for the process, a new temperature measurement method has been developed. By adopting the novel concept of temporal, rather than spectral, constraints for solving the multispectral pyrometry problem, it opens up for temperature measurements which compensates for e.g. an oxidising deposit. For maintaining a good deposition process in laser metal wire deposition, control of tool position and wire feed rate is required. Based on measurements of resistance through the weld pool, a simple yet well performing control system is presented in this thesis. The control system obtains geometrical input information from resistance measurements made in-situ, and feeds this information to an iterative learning controller. This results in a robust, cheap and practical control solution for laser metal wire deposition, which is suitable for industrial use and that can easily be retrofitted to existing equipment.

sted, utgiver, år, opplag, sider
Göteborg: Chalmers University of Technology,, 2015. s. 98
Serie
Doktorsavhandlingar vid Chalmers tekniska högskola. Ny serie, ISSN 0346-718X ; 3829
Emneord
Additive Manufacturing, Automation, Emissivity, Emissivity Compensated Spectral Pyrometry, Laser Metal Wire Deposition, Metal Deposition, Pyrometry, Resistance Feedback Control, Thermometry
HSV kategori
Forskningsprogram
TEKNIK, Produktions- och materialteknik
Identifikatorer
urn:nbn:se:hv:diva-7428 (URN)9789175971483 (ISBN)
Opponent
Veileder
Tilgjengelig fra: 2015-03-06 Laget: 2015-03-06 Sist oppdatert: 2016-02-08bibliografisk kontrollert
Hagqvist, P., Heralic, A., Christiansson, A.-K. & Lennartson, B. (2015). Resistance based iterative learning control of additive manufacturing with wire. Mechatronics (Oxford), 31, 116-123
Åpne denne publikasjonen i ny fane eller vindu >>Resistance based iterative learning control of additive manufacturing with wire
2015 (engelsk)Inngår i: Mechatronics (Oxford), ISSN 0957-4158, E-ISSN 1873-4006, Vol. 31, s. 116-123Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

This paper presents successful feed forward control of additive manufacturing of fully dense metallic components. The study is a refinement of former control solutions of the process, providing more robust and industrially acceptable measurement techniques. The system uses a solid state laser that melts metal wire, which in turn is deposited and solidified to build the desired solid feature on a substrate. The process is inherently subjected to disturbances that might hinder consecutive layers to be deposited appropriately. The control action is a modified wire feed rate depending on the surface of the deposited former layer, in this case measured as a resistance. The resistance of the wire stick-out and the weld pool has shown to give an accurate measure of the process stability, and a solution is proposed on how to measure it. By controlling the wire feed rate based on the resistance measure, the next layer surface can be made more even. A second order iterative learning control algorithm is used for determining the wire feed rate, and the solution is implemented and validated in an industrial setting for building a single bead wall in titanium alloy. A comparison is made between a controlled and an uncontrolled situation when a relevant disturbance is introduced throughout all layers. The controller proves to successfully mitigate these disturbances and maintain stable deposition while the uncontrolled deposition fails.

Emneord
Additive manufacturing, Metal deposition, Automatic control, Resistance, Process measurement, Iterative learning control
HSV kategori
Forskningsprogram
TEKNIK, Produktions- och materialteknik
Identifikatorer
urn:nbn:se:hv:diva-7429 (URN)10.1016/j.mechatronics.2015.03.008 (DOI)000367772000013 ()
Merknad

Available online 10 April 2015. Ingår i avhandling

Tilgjengelig fra: 2015-03-06 Laget: 2015-03-06 Sist oppdatert: 2018-06-18bibliografisk kontrollert
Hagqvist, P., Sikström, F., Christiansson, A.-K. & Lennartson, B. (2014). Emissivity compensated spectral pyrometry for varying emissivity metallic measurands. Measurement science and technology, 25(2), 025010
Åpne denne publikasjonen i ny fane eller vindu >>Emissivity compensated spectral pyrometry for varying emissivity metallic measurands
2014 (engelsk)Inngår i: Measurement science and technology, ISSN 0957-0233, E-ISSN 1361-6501, Vol. 25, nr 2, s. 025010-Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

A novel method for converting electromagnetic spectral radiance information into emperature measurements is presented. It allows for varying spectral emissivity of the metallic measurand during the course of the measurement. Such variations are due to e.g. thermal oxidation or temperature dependent emissivity. Based on the assumption that emissivity changes with time and temperature in a continuous manner, it is further assumed that an emissivity estimate at one sample instance can be derived from the estimated emissivity found at the previous samples together with updated spectral information. This leads to successive recalculations of spectral emissivity together with corresponding temperature values. The proposed algorithm has been proven to give accurate temperature estimates from a measurement based on data captured by a standard UV-Vis spectrophotometer even for an oxidizing Ti-6Al-4V specimen in a temperature range between 900K and 1400K. The method however, is not limited to these wavelength- or temperature-ranges.

Emneord
Emissivity Compensated Spectral Pyrometry
HSV kategori
Forskningsprogram
TEKNIK, Produktions- och materialteknik
Identifikatorer
urn:nbn:se:hv:diva-5607 (URN)10.1088/0957-0233/25/2/025010 (DOI)000332697800010 ()2-s2.0-84892898937 (Scopus ID)
Merknad

Del av lic.  

Tilgjengelig fra: 2013-09-18 Laget: 2013-09-18 Sist oppdatert: 2019-05-10bibliografisk kontrollert
Hagqvist, P., Sikström, F., Christiansson, A.-K. & Lennartson, B. (2014). Emissivity compensated spectral pyrometry-algorithm and sensitivity analysis. Measurement science and technology, 25(2), 025011
Åpne denne publikasjonen i ny fane eller vindu >>Emissivity compensated spectral pyrometry-algorithm and sensitivity analysis
2014 (engelsk)Inngår i: Measurement science and technology, ISSN 0957-0233, E-ISSN 1361-6501, Vol. 25, nr 2, s. 025011-Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

In order to solve the problem of non-contact temperature measurements on an object with varying emissivity, a new method is herein described and evaluated. The method uses spectral radiance measurements and converts them to temperature readings. It proves to be resilient towards changes in spectral emissivity and tolerates noisy spectral measurements. It is based on an assumption of continuous changes in emissivity and uses historical values of spectral emissivity and temperature for estimating current spectral emissivity.

The algorithm, its constituent steps and accompanying parameters are described and discussed. A thorough sensitivity analysis of the method is carried out through simulations. No rigorous instrument calibration is needed for the presented method and is therefore industrially tractable.

Emneord
Spectral pyrometry
HSV kategori
Forskningsprogram
TEKNIK, Produktions- och materialteknik
Identifikatorer
urn:nbn:se:hv:diva-5608 (URN)10.1088/0957-0233/25/2/025011 (DOI)000332697800011 ()2-s2.0-84892836708 (Scopus ID)
Tilgjengelig fra: 2013-09-18 Laget: 2013-09-18 Sist oppdatert: 2019-05-10bibliografisk kontrollert
Hagqvist, P., Heralic, A., Christiansson, A.-K. & Lennartson, B. (2014). Resistance measurements for control of laser metal wire deposition. Optics and lasers in engineering, 54(March), 62-67
Åpne denne publikasjonen i ny fane eller vindu >>Resistance measurements for control of laser metal wire deposition
2014 (engelsk)Inngår i: Optics and lasers in engineering, ISSN 0143-8166, E-ISSN 1873-0302, Vol. 54, nr March, s. 62-67Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

A method for controlling robotized laser metal wire deposition online by electrical resistance metering is proposed. The concept of measuring the combined resistance of the wire and the weld pool is introduced and evaluated for automatic control purposes. Droplet formation, detachment of the wire from the weld pool and stubbing can be hard to avoid during processing due to the sensitive process and short reaction times needed for making on-line adjustments. The implemented system shows a possible route for automatic control of the process wherein such problems can be avoided automatically. The method proves to successfully adjust the distance between the tool and the workpiece through controlling the robot height position, thus increasing stability of the laser metal wire deposition process.

Emneord
Laser metal wire deposition;Automatic control ;Resistance ; Additive manufacturing
HSV kategori
Forskningsprogram
TEKNIK, Produktions- och materialteknik
Identifikatorer
urn:nbn:se:hv:diva-5610 (URN)10.1016/j.optlaseng.2013.10.010 (DOI)000328720700010 ()2-s2.0-84887089320 (Scopus ID)
Forskningsfinansiär
EU, FP7, Seventh Framework Programme, 266271
Tilgjengelig fra: 2013-09-18 Laget: 2013-09-18 Sist oppdatert: 2019-05-10bibliografisk kontrollert
Hagqvist, P., Kristoffersen, H. & Christiansson, A.-K. (2014). Temperature Monitoring of Induction Hardening Using Spectral Pyrometry. In: Stahre, Johan, Johansson, Björn & Björkman, Mats (Ed.), Proceedings of the 6th International Swedish Production Symposium 2014: . Paper presented at 6th Swedish Production Symposium (pp. 1-7).
Åpne denne publikasjonen i ny fane eller vindu >>Temperature Monitoring of Induction Hardening Using Spectral Pyrometry
2014 (engelsk)Inngår i: Proceedings of the 6th International Swedish Production Symposium 2014 / [ed] Stahre, Johan, Johansson, Björn & Björkman, Mats, 2014, s. 1-7Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

In this study, a recently developed multispectral temperature measurement method is applied for temperature monitoring of induction hardening of steel. An industry-like induction heating process is used for evaluating the method and an automatic calibration procedure is presented. Thermocouples and a conventional pyrometer are used for comparison, showing that the multispectral method gives more accurate results than the conventional pyrometer. These results confirm that the multispectral method is well suited for accurate, non-contacting temperature measurements for induction hardening processes. Enabling measurements which have previously not been possible. This enables fast selection of process parameters which can improve productivity.

Emneord
Induction hardening, pyrometry, spectral pyrometry, ECSP
HSV kategori
Forskningsprogram
TEKNIK, Produktions- och materialteknik; Produktionsteknik
Identifikatorer
urn:nbn:se:hv:diva-6719 (URN)978-91-980974-1-2 (ISBN)
Konferanse
6th Swedish Production Symposium
Tilgjengelig fra: 2014-10-09 Laget: 2014-09-30 Sist oppdatert: 2018-08-12bibliografisk kontrollert
Hagqvist, P. & Christiansson, A.-K. (2013). Automatic detection of material phase transitions from spectroscopic data. In: Proceedings of the IECON 2013: 39th Annual Conference of the IEEE Industrial Electronics Society. Paper presented at IECON 2013. 39th Annual Conference of the IEEE Induistrial Electronics Society. In conjunction with ICELIE 2013, IWIES 2013. Vienna, Austria 10-13 November 2013 (pp. 2384-2389). IEEE
Åpne denne publikasjonen i ny fane eller vindu >>Automatic detection of material phase transitions from spectroscopic data
2013 (engelsk)Inngår i: Proceedings of the IECON 2013: 39th Annual Conference of the IEEE Industrial Electronics Society, IEEE, 2013, s. 2384-2389Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

When using a temperaturemeasurementmethod which utilizes spectral information for measuring the temperature of varying emissivity measurands, there is a need for a temperature reference at some point in time. In this work, such a reference is created from the spectral radiance data already used by the temperature measurement method. A method of using knowledge of the measurand material's phase transitions and spectral radiance data as a temperature reference is presented. Through automatical identification of phase transitions from radiance spectra employing signal processing, the temperature is known at a certain instance in time, just like required by the temperature measurement method. Three methods for automatic identification of material phase transitions from spectroscopic data are examined and evaluated. The methods are, based on derivatives, steady-state identification and cross correlation respectively. They are introduced and evaluated using experimental data collected from a solidifying copper sample. All methods proved to identify the phase transitions correctly. The addition of automatic phase transition identification supplements the existing temperature measurement method such that it becomes a stand alone, reference free method for measuring the true absolute temperature of a measurand with varying emissivity.

sted, utgiver, år, opplag, sider
IEEE, 2013
Serie
Proceedings of the Annual Conference of the IEEE Industrial Electronics Society, ISSN 1553-572X
Emneord
materialphase transitions, spectroscopic data, WIL, Work-integrated Learning, AIL
HSV kategori
Forskningsprogram
TEKNIK, Produktions- och materialteknik; Arbetsintegrerat lärande
Identifikatorer
urn:nbn:se:hv:diva-5609 (URN)10.1109/IECON.2013.6699504 (DOI)2-s2.0-84893523136 (Scopus ID)978-1-4799-0223-1 (ISBN)
Konferanse
IECON 2013. 39th Annual Conference of the IEEE Induistrial Electronics Society. In conjunction with ICELIE 2013, IWIES 2013. Vienna, Austria 10-13 November 2013
Merknad

 Article number 6699504

Tilgjengelig fra: 2013-09-18 Laget: 2013-09-18 Sist oppdatert: 2018-08-09bibliografisk kontrollert
Hagqvist, P., Sikström, F. & Christiansson, A.-K. (2013). Emissivity estimation for high temperature radiation pyrometry on Ti–6Al–4V. Measurement, 46(2), 871-880
Åpne denne publikasjonen i ny fane eller vindu >>Emissivity estimation for high temperature radiation pyrometry on Ti–6Al–4V
2013 (engelsk)Inngår i: Measurement, ISSN 0263-2241, E-ISSN 1873-412X, Vol. 46, nr 2, s. 871-880Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

The paper demonstrates a versatile procedure suitable for industrial implementation of temperature measurement on a hot titanium alloy. The driving force has been the need for an accurate temperature measurement during additive manufacturing using laser welding technology where Ti–6Al–4V-wire is melted. The challenges consider both industrial constraints and the varying emissivity of the surface. Measurements makes use of a narrow bandwidth spot radiation pyrometer and a calibration procedure for estimation of the surface temperature through spectral emissivity estimation. The theoretical results are validated through experiments. A number of difficulties in radiation temperature measurements for metals with varying surface properties are discussed; especially the case of surface oxidation. The uncertainty in temperature reading due to the uncertainty in the emissivity estimate is established along with a model that qualitatively describes surface oxidation. The procedure is expected to be useful for several manufacturing applications where it is important to control high temperatures.

Emneord
Ti-6Al-4V; Temperature; Emissivity; Radiation pyrometer; Laser metal deposition; Calibration, WIL, Work-integrated Learning
HSV kategori
Forskningsprogram
TEKNIK, Fysik; Arbetsintegrerat lärande
Identifikatorer
urn:nbn:se:hv:diva-4856 (URN)10.1016/j.measurement.2012.10.019 (DOI)000314428600004 ()2-s2.0-84870711131 (Scopus ID)
Forskningsfinansiär
EU, FP7, Seventh Framework Programme, 266271
Tilgjengelig fra: 2012-12-06 Laget: 2012-12-06 Sist oppdatert: 2019-04-30bibliografisk kontrollert
Hagqvist, P. (2013). Instrumentation and estimation for high temperature control. (Licentiate dissertation). Göteborg: Chalmers Reproservice
Åpne denne publikasjonen i ny fane eller vindu >>Instrumentation and estimation for high temperature control
2013 (engelsk)Licentiatavhandling, med artikler (Annet vitenskapelig)
Abstract [en]

Within a variety of industrially relevant high temperature production processes such as welding, heat treatment and metal deposition, the quality of the manufactured component is largely affected by how well parameters can be controlled during processing. These parameters might be, in the case of metal deposition, power input, material feed, or a parameter which is common for all of the aforementioned processes: material temperature. The ability to correctly measure, or in other ways estimate process parameters is vital in order to successfully control high temperature processes such as above 700 degrees Celsius. In this work, instrumentation and estimation solutions adapted to high temperature control are proposed and implemented with a focus on the laser metal wire deposition process. Special attention is given to temperature measurements on specimens with varying emissivity as commonly found in high temperature processes. A calibration procedure for a single-wavelength pyrometer is also presented together with a general discussion on limitations of such a system for measurands with varying emissivity. A new method for non-contact emissivity compensated temperature estimations using a spectrometer is presented. Simulations and industrially relevant experiments have been carried out validating the method. The theoretical framework for the developed method will be further investigated in the future together with additional experimental validation. In addition to temperature measurements, a method for real-time process control of laser metal wire deposition has been developed and implemented with good results. This control scheme estimates and controls the tool-to-workpiece distance based on resistance measurements. Such measurements allow for placement of instruments outside of the processing chamber and easy integration into existing equipment. Future work will be directed towards incorporation of resistance measurements into an iterative learning control scheme. Also, improvement on the resistance-distance model and further investigation into suitable signal processing methods for the resistance signal will be pursued.

sted, utgiver, år, opplag, sider
Göteborg: Chalmers Reproservice, 2013. s. 156
Serie
R - Department of Signals and Systems, Chalmers University of Technology, ISSN 1403-266x ; R017
Emneord
Additive Manufacturing, Automation, Emissivity, Emissivity Compensated Spectral Pyrometry, Laser Metal Wire Deposition, Metal Deposition, Pyrometry, Resistance Feedback Control, Thermometry, Varying Emissivity
HSV kategori
Forskningsprogram
TEKNIK, Produktions- och materialteknik; TEKNIK, Fysik
Identifikatorer
urn:nbn:se:hv:diva-5602 (URN)
Presentation
2013-09-25, C118, Högskolan Väst, Trollhättan, 09:25 (engelsk)
Opponent
Veileder
Forskningsfinansiär
EU, FP7, Seventh Framework Programme, 266271
Tilgjengelig fra: 2013-09-25 Laget: 2013-09-18 Sist oppdatert: 2016-02-08bibliografisk kontrollert
Organisasjoner
Identifikatorer
ORCID-id: ORCID iD iconorcid.org/0000-0002-2824-0271